How to Fold a Paper Rose

Step-by-Step Guide

1. 1

   Step 1: Get a square piece of paper.

   This paper rose starts with a simple square, as most origami projects do.
   
   Choose any color you'd like, so long as the two sides are different in color or texture.Glossy paper makes for the most realistic-looking rose.
2. 2

   Step 2: Fold the paper in half (Start with the colored side down

   Bring the bottom edge of the paper up to meet the top edge.
   
   Crease the fold with your fingers, working from the center outwards.
   
   In the origami world, this is known as a "valley fold," because it creates a little valley in the paper Almost every origami project begins with a valley fold or its opposite, the mountain fold, which creates a ridge., When you open the fold, you'll see the crease you've made running right through the middle of the paper, creating a horizontal line.
   
   Orient the crease horizontally, with the red side down. , Line up the bottom edge of the paper to meet the horizontal crease in the middle.
   
   Crease the new fold with your fingers. , Bring the top edge of the paper to meet the lower horizontal crease.Crease the new fold with your finger. , Now there are three horizontal creases in the paper making four equal sections., Make sure your paper is oriented so that the three creases you created in the previous step are horizontal, with the red side down.
   
   Take the bottom edge of the paper (The side closest to your body) and drag it up across the surface of the paper until it meets the crease that is closest to the top.
   
   The crease you are trying to get the bottom edge to meet with is located one fourth of the way down the paper from the top.Crease the new fold with your fingers or a bone folder.
   
   If you've done the fold correctly, the area between the crease in the middle of the paper and the crease three-fourths of the way down the paper has been split in half with your new fold.
   
   You can unfold the crease you just made to make sure you did it right.
   
   However, make sure to fold it back into place before moving on to the next step. , Take hold of the bottom-right corner (as made by the bottom crease) and make a small diagonal fold at a 45 degree angle.
   
   The corner should fold upward so that a small portion of the right edge of the paper aligns with nearest crease., You should see four horizontal creases.
   
   Of your four original areas, the one second from the bottom should be divided in half by one of these horizontal creases.
   
   Additionally, in this same area, you should see two small diagonal creases on the right side.Of these two diagonal creases, one should be going up at a 45 degree angle from the horizontal crease, and the other down at the same angle. , Using a pen or pencil, draw lines along your creases., Turn the paper so that the top becomes the bottom.
   
   Then, repeat steps 7 through
   10., Turn the paper one quarter of a turn, then repeat steps 2 through
   10., Turn the paper another half-turn, then repeat steps 7 through
   10., With the red side still down, take the lower right corner and bring it to meet the upper left corner.
   
   Crease the fold with your finger., Open it up to reveal a new diagonal crease., Rotate the paper 90 degrees and repeat the previous two steps., Open it up to reveal two diagonal creases that form an "X" through the paper., In each corner of your paper, you should now see a small square that is divided by a single diagonal crease.
   
   Take hold of the top left corner and fold it inward, creating a crease that is perpendicular to the original diagonal crease.The corner of your paper should align with the bottom-right corner of the small square. , You should now see a small "X" in the top left corner.
   
   Draw a line along the new crease., Take the bottom-right corner and bring it up so that the point of the corner just touches the new line you drew in the previous step.This should create a new crease that runs parallel to one of the lines making up the big "X," specifically the one running from bottom-left to top-right. , Unfold and draw a line along the new diagonal crease., Turn the paper 180 degrees and repeat the previous four steps.You should now see three lines running parallel from the bottom-left corner of your paper up to the top right. , Now turn the paper 90 degrees and repeat steps 5 through 9 (of Part 2).When you are done, you should have three parallel lines running from bottom-left to top-right and three running from top-left to bottom-right. , As in step 5 of Part two, fold in all four corners.
   
   You should not need to make any new creases to do this.The end result will be an octagon. , The red side of your paper should now be face up., Along the bottom edge of your paper, you should see a small creased triangle.
   
   It has a crease down the middle, making it look like two smaller triangles that share a vertical side.
   
   If you have trouble finding it, look for the triangle's right-most corner.
   
   The triangle's right-most corner is in the spot where the bottom edge of the paper, which is horizontal, meets the bottom-right edge of the paper, which is diagonal.
   
   If the small triangle isn't there, check to make sure you did step eight of part one correctly. , If you don't know what an inside reverse-fold is or forget how to do an inside reverse-fold, follow the steps belowFold the center crease of the triangle you located in the last step gently inward, creating a small valley fold.
   
   At the same time, fold the two diagonal sides of the triangle outward to create small mountain folds.
   
   This should result in the small triangle creating a small "notch" in the side of the paper.
   
   Then, create one more mountain fold along the crease extending from the tip of the triangle.
   
   This is called an inside reverse-fold., In what was once the bottom left corner, you'll need to fold another notch of a slightly different shape.Directly to the right of the small triangle (The one you just made an inside reverse fold with) is another crease.
   
   It runs parallel to the right side of the smaller triangle, and is perpendicular to the side of the octagon.
   
   Push gently inward along this crease to create a valley fold.
   
   Then, as before, push the sides of the triangle gently outward, creating small ridges.
   
   Finally, create one more valley fold, pushing inward the nearest horizontal crease that runs parallel to the horizontal side of your new "notch."This last crease should run out to just past the center of your paper, creating one side of the small square in the center that you can see marked out on the reverse side. , Turn the paper 90 degrees and repeat Steps 3 and
   4.
   
   Do this for the 3 remaining sides., Now that the basic structure of your rose is in place, it's time to start working on the petals.
   
   As your first step, you'll need to add a valley fold the outside edge of each one.You'll see that, if you look a your rose from above, it has four long valleys extending out from a square in the center.
   
   On the right side of each of these is a large, flat surface.
   
   Grasp the edge of this surface and fold it inward.
   
   Specifically, grab the three sides of the outside edge and fold them in such that a small tab shaped like a trapezoid is formed., Looking at your rose from the side, you should now see that you have four shapes that look like triangles with one corner chopped off (along the area you just valley-folded).
   
   Protruding from the base of each of these you should see a small triangle of the white side of your paper.
   
   Fold in the right-side point of each of these "chopped-off" triangles.Draw an imaginary line straight up from the bottom point of the "white" triangle, and make a valley fold along it., Unfold the valley folds you just made to the tips.
   
   Then, reverse fold them such that each tip disappears inside the rose.If you've done this correctly, the white triangles should no longer be visible. , Your "chopped off" triangles should now look like they have two points chopped off: one on the left and a tiny one on the right, created by your reverse folds.
   
   You'll now fold up the tiny "chopped" side at a 45 degree angle from the base of the "chopped" triangle (i.e. the edge of the paper)., Unfold the valley folds you just made, and then reverse fold along the same lines, folding the tiny triangle you created in the previous step inside the rose at all four points., Your "chopped off" triangle should now have reverse folds at each "chopped" edge.
   
   These will allow you to make a small valley fold, horizontal to the base of each triangle, folding the resulting tab outward.
   
   Do this to all four petals., Bring the petals together to create "legs." For each set of petals, pull them close together such that the right-side one sits just behind the left-side one.
   
   Press down on the creases to hold them in place.
   
   The result should be four pointed and fairly sturdy legs.If you've done this right, you should be able to see little or no white-side surface on the legs when looking at your rose from the side. , Turn your rose over such that you are looking down into the white interior.
   
   Then, one by one, fold down each of the triangular legs.Insert the ends into one another such that you close off the opening of the rose., The square that you are looking down on will become the top of the rose., The square on top of your rose should be divided into four quadrants by creases.
   
   With your finger, gently push in each quadrant, leaving in place the ridges that form an "X" over the top of the square., Place a finger into each of the four quadrants around the "X" and gently rotate.This should give the top of rose a more swirled, organic feel, as opposed to the hard lines of the "X."
   
   With a pair of tweezers, grab the center of what was once the "X," and slowly but firmly continue to rotate, being careful not to tear the paper.As you do this, the center of the rose will sink inside, creating a more realistic look.
   
   This may take several tries to get right. , Using two fingers, take each petal by the point and roll it toward the center, then release.
   
   This will create nicely curled petals., If you want to add an origami stem, start with a fresh piece of paper, preferable green. , Valley fold the paper, from corner to corner, creating two triangles, then unfold., Create two more valley folds, folding the left and right corners in toward the center crease, creating a kite shape., Fold the corners in again toward the center crease.
   
   Then do it one more time.
   
   You should now have a very skinny kite shape., Flip your stem over so that the edges of the paper all face hidden, then fold the bottom point up to the top one., Now, fold the stem in half along the vertical axis., Fold the outer part (which will become the leaf) of the paper outward, away from the inside (stem), creating two diagonal creases.
   
   Then, reverse fold the leaf out and away from the stem.
   
   It will have crease in the center., Put the pointed end of the stem through the small hole in the underside of your rose where the "legs" all meet.
3. 3

   Step 3: white side up).

4. 4

   Step 4: Unfold the paper.

5. 5

   Step 5: Fold the bottom half in half.

6. 6

   Step 6: Fold the top half in half.

7. 7

   Step 7: Unfold the paper.

8. 8

   Step 8: Fold the bottom in three-quarters.

9. 9

   Step 9: Fold the bottom-right corner in.

10. 10

    Step 10: Unfold the paper.

11. 11

    Step 11: Mark the creases.

12. 12

    Step 12: Rotate the paper 180 degrees and repeat.

13. 13

    Step 13: Rotate the paper 90 degrees and repeat.

14. 14

    Step 14: Rotate 180 degrees and repeat.

15. 15

    Step 15: Fold the paper in half diagonally.

16. 16

    Step 16: Unfold the paper.

17. 17

    Step 17: Fold the paper on the opposite diagonal.

18. 18

    Step 18: Unfold the paper.

19. 19

    Step 19: Fold the top-left corner.

20. 20

    Step 20: Unfold and mark all the new creases formed.

21. 21

    Step 21: Fold the bottom-right corner up to the new line.

22. 22

    Step 22: Unfold and mark.

23. 23

    Step 23: Rotate and repeat.

24. 24

    Step 24: Rotate and repeat

25. 25

    Step 25: again.

26. 26

    Step 26: Fold in the four corners.

27. 27

    Step 27: Turn the paper over.

28. 28

    Step 28: Locate the small triangle.

29. 29

    Step 29: Make an inside reverse-fold in the bottom.

30. 30

    Step 30: Make another inside reverse-fold.

31. 31

    Step 31: Rotate and repeat.

32. 32

    Step 32: Valley fold each petal's edge.

33. 33

    Step 33: Fold in the corners.

34. 34

    Step 34: Unfold the corners and reverse fold them.

35. 35

    Step 35: Add tiny valley folds.

36. 36

    Step 36: Unfold and reverse fold.

37. 37

    Step 37: Fold down the edges.

38. 38

    Step 38: Create legs.

39. 39

    Step 39: Turn it over and fold the legs in.

40. 40

    Step 40: Turn the rose over.

41. 41

    Step 41: Push in the quadrants.

42. 42

    Step 42: Rotate.

43. 43

    Step 43: Make a swirl.

44. 44

    Step 44: Curl the petals.

45. 45

    Step 45: Get a new piece of paper.

46. 46

    Step 46: Start with the white side up and fold it in half.

47. 47

    Step 47: Fold the corners in.

48. 48

    Step 48: Repeat.

49. 49

    Step 49: Turn it over and fold upward.

50. 50

    Step 50: Fold it in half.

51. 51

    Step 51: Fold down the sides

52. 52

    Step 52: then reverse fold.

53. 53

    Step 53: Attach the stem.

Detailed Guide

About the Author