How to Tie Dye a Bikini
Gather your materials., Wash the bikini., Put on gloves., Soak your bikini in warm water and soda ash., Lay out a trash bag., Prepare the dyes., Mix custom colors., Twist and secure sections of the bikini top and bottom., Apply dye to the fabric...
Step-by-Step Guide
-
Step 1: Gather your materials.
Making your own tie dye bikini is easy, but you will need some special materials before you can begin.
You will need: a tie dye kit and any extra tie dye colors you want to use spray bottles (for any custom colors you want to create) a large trash bag, some newspaper, or a tarp a white bikini soda ash -
Step 2: Wash the bikini.
To make sure that there are no dyes or oils on the bikini fabric that might interfere with the dyeing process, you should wash your bikini before you dye it.
Put the bikini in a washing machine on the regular cycle with a small amount of detergent.
You do not need to dry the bikini after you wash it. , You will need to protect your hands from the chemicals and dye, so put on your gloves before you start mixing anything.
Leave the gloves on throughout the entire dyeing process and then remove them after you have set out the bikini to dry.
You may also want to wear an apron or an old t-shirt to avoid damaging any of your good clothes. , Prepare a solution of warm water and soda ash by mixing 1 cup of soda ash immerse your bikini in the solution.Let the bikini soak in the soda ash solution for about an hour.
The soda ash will prepare the bikini fabric for the dye, which will result in bright, bold colors.
If you prefer more of a pastel look, then you can skip the soda ash.
Wring out the bikini after it is done soaking., Tie dyeing can be messy and the dye may leave permanent stains on hard and soft surfaces, such as countertops, tables, and carpets.
To protect the surfaces in your area, lay out a large trash bag, some layered newspaper, or a tarp.
Make sure that you have covered a large enough area to work on. , Take the tie dye bottles provided with the kits and It is important to shake the bottles well or else you may end up with inconsistent dye colors or even some black speckles on your tie dye items. , If you want to create any custom colors to use on your bikini, then you can mix them in the empty spray bottles.For example, if you want to make a pinkish purple color, then you might add a little pink to some purple dye in one of these bottles.
Make sure that you mix the custom colors well. , To create the tie dye pattern, you will need to section off fabric and secure the sections with rubber bands.
You can section off the bikini fabric in as many areas as you like to create the pattern that you want.
Twist each section of material tightly before you secure it with a rubber band.
Make sure that you secure the rubber bands tightly as well. , Use your dye and/or spray bottles to squirt the dye onto your secured segments.
Apply the dye in the desired pattern.For example, you might use pink on one section, then green on the next section, and then yellow on the next section.
Make sure that you squeeze enough dye onto the sections to saturate the fabric through to the twisted layers.
Otherwise, you may end up with undyed white spots on your bikini.Don’t forget to wear gloves on both of your hands to avoid staining your hands while you dye the bikini. , When you have finished dyeing your bikini, remove the rubber bands.
Then, lay your bikini outside in a dry, sunny place and allow it to dry for about four hours.
This will help the dye set in.
Make sure that you lay the bikini out somewhere that will not be damaged if any dye leaks onto it.
To be safe, you may want to leave the plastic garbage bag under it. , After the bikini has dried, put it into a dryer without any other clothes.
Run the dryer on high for about 20 minutes.
This will help the dye set in even more.
After the 20 minutes are up, your tie dye bikini is ready to wear! You may want to wash the bikini before you wear it to remove any excess dye.
Otherwise, the dye may run when you wear the bikini for the first time., Twisting the fabric starting in the center is one of the most classic ways to tie dye.
Grab the fabric in the center (either of a bra cup or your bikini bottom) and then twist it tightly.
Then, bundle the fabric with rubber bands so that they criss-cross each other.
The rubber bands and fabric segments should resemble pieces of a pie.
Your end result will be a spiral design that starts in the center of your bikini bra cups and bottoms., You can create a wavy striped pattern on your bikini by folding your bikini before you dye it.
Fold the material in narrow pleats and then place rubber bands about an inch or two apart to secure the folds in place.
Use the rubber bands as your guide to apply the dye.
You can use as many colors and rubber bands as you want to create your unique fan fold design. , You can also draw a heart over you tie dye after it is done drying.
After you finish tie dyeing in your desired colors and the colors have set, take a bleach pen or a darker color dye and draw a heart somewhere on your bikini bottoms or bra top.
Try drawing a heart near your hip or on one corner of one of your bra cups.
You can also draw stars, initials, and other symbols on your bikini. -
Step 3: Put on gloves.
-
Step 4: Soak your bikini in warm water and soda ash.
-
Step 5: Lay out a trash bag.
-
Step 6: Prepare the dyes.
-
Step 7: Mix custom colors.
-
Step 8: Twist and secure sections of the bikini top and bottom.
-
Step 9: Apply dye to the fabric sections.
-
Step 10: Let the bikini dry outside for four hours.
-
Step 11: Put the bikini into a dryer for 20 minutes.
-
Step 12: Try a central twist.
-
Step 13: Use a fan fold pattern.
-
Step 14: Draw a heart.
Detailed Guide
Making your own tie dye bikini is easy, but you will need some special materials before you can begin.
You will need: a tie dye kit and any extra tie dye colors you want to use spray bottles (for any custom colors you want to create) a large trash bag, some newspaper, or a tarp a white bikini soda ash
To make sure that there are no dyes or oils on the bikini fabric that might interfere with the dyeing process, you should wash your bikini before you dye it.
Put the bikini in a washing machine on the regular cycle with a small amount of detergent.
You do not need to dry the bikini after you wash it. , You will need to protect your hands from the chemicals and dye, so put on your gloves before you start mixing anything.
Leave the gloves on throughout the entire dyeing process and then remove them after you have set out the bikini to dry.
You may also want to wear an apron or an old t-shirt to avoid damaging any of your good clothes. , Prepare a solution of warm water and soda ash by mixing 1 cup of soda ash immerse your bikini in the solution.Let the bikini soak in the soda ash solution for about an hour.
The soda ash will prepare the bikini fabric for the dye, which will result in bright, bold colors.
If you prefer more of a pastel look, then you can skip the soda ash.
Wring out the bikini after it is done soaking., Tie dyeing can be messy and the dye may leave permanent stains on hard and soft surfaces, such as countertops, tables, and carpets.
To protect the surfaces in your area, lay out a large trash bag, some layered newspaper, or a tarp.
Make sure that you have covered a large enough area to work on. , Take the tie dye bottles provided with the kits and It is important to shake the bottles well or else you may end up with inconsistent dye colors or even some black speckles on your tie dye items. , If you want to create any custom colors to use on your bikini, then you can mix them in the empty spray bottles.For example, if you want to make a pinkish purple color, then you might add a little pink to some purple dye in one of these bottles.
Make sure that you mix the custom colors well. , To create the tie dye pattern, you will need to section off fabric and secure the sections with rubber bands.
You can section off the bikini fabric in as many areas as you like to create the pattern that you want.
Twist each section of material tightly before you secure it with a rubber band.
Make sure that you secure the rubber bands tightly as well. , Use your dye and/or spray bottles to squirt the dye onto your secured segments.
Apply the dye in the desired pattern.For example, you might use pink on one section, then green on the next section, and then yellow on the next section.
Make sure that you squeeze enough dye onto the sections to saturate the fabric through to the twisted layers.
Otherwise, you may end up with undyed white spots on your bikini.Don’t forget to wear gloves on both of your hands to avoid staining your hands while you dye the bikini. , When you have finished dyeing your bikini, remove the rubber bands.
Then, lay your bikini outside in a dry, sunny place and allow it to dry for about four hours.
This will help the dye set in.
Make sure that you lay the bikini out somewhere that will not be damaged if any dye leaks onto it.
To be safe, you may want to leave the plastic garbage bag under it. , After the bikini has dried, put it into a dryer without any other clothes.
Run the dryer on high for about 20 minutes.
This will help the dye set in even more.
After the 20 minutes are up, your tie dye bikini is ready to wear! You may want to wash the bikini before you wear it to remove any excess dye.
Otherwise, the dye may run when you wear the bikini for the first time., Twisting the fabric starting in the center is one of the most classic ways to tie dye.
Grab the fabric in the center (either of a bra cup or your bikini bottom) and then twist it tightly.
Then, bundle the fabric with rubber bands so that they criss-cross each other.
The rubber bands and fabric segments should resemble pieces of a pie.
Your end result will be a spiral design that starts in the center of your bikini bra cups and bottoms., You can create a wavy striped pattern on your bikini by folding your bikini before you dye it.
Fold the material in narrow pleats and then place rubber bands about an inch or two apart to secure the folds in place.
Use the rubber bands as your guide to apply the dye.
You can use as many colors and rubber bands as you want to create your unique fan fold design. , You can also draw a heart over you tie dye after it is done drying.
After you finish tie dyeing in your desired colors and the colors have set, take a bleach pen or a darker color dye and draw a heart somewhere on your bikini bottoms or bra top.
Try drawing a heart near your hip or on one corner of one of your bra cups.
You can also draw stars, initials, and other symbols on your bikini.
About the Author
Amber Moore
Committed to making crafts accessible and understandable for everyone.
Rate This Guide
How helpful was this guide? Click to rate: