How to Reset Aftermarket (Checkmate) Car Alarm
Identify your valet switch., Turn the ignition key to the on position., Toggle the switch or push the button.
Step-by-Step Guide
-
Step 1: Identify your valet switch.
The valet switch is either a toggle switch or a push button that disarms all alarm functions except the remote panic and remote door lock functions.
This eliminates the need to hand your remote to garage mechanics and valets, giving the switch its name.Usually this switch is located somewhere under the dash, perhaps on the left kick panel.A valet switch is a standard piece of equipment with most factory and aftermarket alarm systems.
Using the valet switch should serve to reset your alarm.
Your alarm should stay shut down as long as you are in valet mode.
You should be aware that this disables you alarm system, meaning that your car is unprotected if you use it as a long term solution. -
Step 2: Turn the ignition key to the on position.
It is not necessary to start the car.
As a matter of fact, you may find that you cannot start the car if you try., This will activate the valet bypass.
The alarm should now be disabled. -
Step 3: Toggle the switch or push the button.
Detailed Guide
The valet switch is either a toggle switch or a push button that disarms all alarm functions except the remote panic and remote door lock functions.
This eliminates the need to hand your remote to garage mechanics and valets, giving the switch its name.Usually this switch is located somewhere under the dash, perhaps on the left kick panel.A valet switch is a standard piece of equipment with most factory and aftermarket alarm systems.
Using the valet switch should serve to reset your alarm.
Your alarm should stay shut down as long as you are in valet mode.
You should be aware that this disables you alarm system, meaning that your car is unprotected if you use it as a long term solution.
It is not necessary to start the car.
As a matter of fact, you may find that you cannot start the car if you try., This will activate the valet bypass.
The alarm should now be disabled.
About the Author
Kenneth Richardson
Kenneth Richardson is an experienced writer with over 13 years of expertise in telecommunications. Passionate about sharing practical knowledge, Kenneth creates easy-to-follow guides that help readers achieve their goals.
Rate This Guide
How helpful was this guide? Click to rate: