How to Add a Seat to a Razor Kick Scooter

Step-by-Step Guide

1. 1

   Step 1: Get a Razor Kick Scooter.

   This works only with scooters that have an aluminum footboard.
   
   To save money, you might just want to buy the basic A scooter.
   
   Remember that the scooter you buy must be able to support your weight and the seat's weight, plus any items you might carry.
   
   The A scooter's weight limit is 143 lbs.
   
   For those weighing more, you should really buy the razor pro scooter. ,,,,,,,, Your holes you have drilled should go right through the scooter to the other side. ,,, You might want to cut off any excess bolt length beyond the nut. ,
2. 2

   Step 2: Order A Razor E200S seat with post from Razor's Replacement Parts section.

3. 3

   Step 3: Get some bolts and nuts (nyloc nuts should work well).

4. 4

   Step 4: Get a drill and some wrenches or a ratchet set.

5. 5

   Step 5: Wear eye protection.

6. 6

   Step 6: Drill two holes on either side of the seat post

7. 7

   Step 7: as close as possible to the center of the post mount.

8. 8

   Step 8: Place seat on top of scooter footboard as close to the back tire as possible.

9. 9

   Step 9: Ensure the seat is facing straight forward

10. 10

    Step 10: exactly how you want it.

11. 11

    Step 11: Drill two holes of the same size right where the holes you have already drilled are (perhaps you should use a clamp to hold the seat).

12. 12

    Step 12: Insert the bolts.

13. 13

    Step 13: Loosely put the nuts on the other end of the nuts.

14. 14

    Step 14: Using two wrenches

15. 15

    Step 15: tighten the bolt and nut together as tight as possible.

16. 16

    Step 16: Try riding it by coasting first on a flat surface at low speed so you don't get hurt.

Detailed Guide

About the Author