How to Dissolve Salt in Water
Choose a salt., Choose your water., Decide how much of each you will use., Pour your water into a container., Weigh out your salt., Pour the salt into the water., Account for the temperature of the water., Account for other solutes in the water...
Step-by-Step Guide
-
Step 1: Choose a salt.
There are many different salts available, and they all have different properties.The amount of Epsom salt (MgSO4) that you can dissolve into a given amount of water at a given temperature will differ from the amount of table salt (NaCl) that you can dissolve into the same water.
If you are trying to understand the dissolution process in general, you should stick with using table salt.If you need to study the properties of a specific salt, use that salt. -
Step 2: Choose your water.
The kind of water you use matters.
For example, tap water has more contaminants than distilled water.
Deionized water can often be even more pure than distilled water.
The purer the water (i.e. the less contaminants it contains) the more salt you will be able to dissolve into it.This is because there are fewer water molecules acting on other substances in the water, and therefore, more molecules to act on your salt. , You will need to decide how much (how many grams) salt you intend to put into your water.
You will also need to know how much water you are using.
If you use too much salt (or too little water) then you will not be able to dissolve all of it.You can add salt slowly to see approximately how much can be dissolved in a given amount of water (at a given temperature).
You can dissolve more salt by adding more water or heating it up. , If you are measuring out a specific amount of water, you can use a graduated cylinder or a beaker.
If you aren’t as worried about exact measurements, any container will do.
Keep in mind that the temperature of the container can affect the temperature of your water.
This isn’t a big deal for most experiments, but if you are doing highly controlled experiments, it is worth considering.Make sure to label your container, especially if you are working in a lab with other people. , Put weigh paper or a weigh boat on your scale and zero the scale.
Add salt a little at a time until you reach the desired amount of salt.
Record the exact amount of salt that you used., If the salt does not immediately dissolve, try mixing it with a spoon or spatula.
You need water molecules to come in contact with your salt to dissolve it, and stirring things up helps that happen more quickly.
You can also heat the mixture to help the salt dissolve., When you are analyzing how much salt you can or cannot dissolve into a given volume of water, you should consider the temperature.
Warmer water will dissolve more salt than cooler water, regardless of the type of salt you are using.
If you are doing a formal experiment, you should record the exact temperature of your water., The more solutes (things dissolved into the water) present, the less water molecules are available to interact with your salt.
There can also be interaction between the solutes and the salt, depending on what solutes are present.
If you are not studying the interaction of a specific solute with your salt, it is best to use distilled or deionized water to minimize the amount of contamination., Your water isn’t the only non-perfect substance you’ll be working with.
Your salt is bound to have some level of impurity.
If you purchased your salt, it is likely food or commercial grade and the impurities will be negligible for most experiments.
If you made your own salt or mined your own salt, then impurities might be higher. -
Step 3: Decide how much of each you will use.
-
Step 4: Pour your water into a container.
-
Step 5: Weigh out your salt.
-
Step 6: Pour the salt into the water.
-
Step 7: Account for the temperature of the water.
-
Step 8: Account for other solutes in the water.
-
Step 9: Account for impurities in your salt.
Detailed Guide
There are many different salts available, and they all have different properties.The amount of Epsom salt (MgSO4) that you can dissolve into a given amount of water at a given temperature will differ from the amount of table salt (NaCl) that you can dissolve into the same water.
If you are trying to understand the dissolution process in general, you should stick with using table salt.If you need to study the properties of a specific salt, use that salt.
The kind of water you use matters.
For example, tap water has more contaminants than distilled water.
Deionized water can often be even more pure than distilled water.
The purer the water (i.e. the less contaminants it contains) the more salt you will be able to dissolve into it.This is because there are fewer water molecules acting on other substances in the water, and therefore, more molecules to act on your salt. , You will need to decide how much (how many grams) salt you intend to put into your water.
You will also need to know how much water you are using.
If you use too much salt (or too little water) then you will not be able to dissolve all of it.You can add salt slowly to see approximately how much can be dissolved in a given amount of water (at a given temperature).
You can dissolve more salt by adding more water or heating it up. , If you are measuring out a specific amount of water, you can use a graduated cylinder or a beaker.
If you aren’t as worried about exact measurements, any container will do.
Keep in mind that the temperature of the container can affect the temperature of your water.
This isn’t a big deal for most experiments, but if you are doing highly controlled experiments, it is worth considering.Make sure to label your container, especially if you are working in a lab with other people. , Put weigh paper or a weigh boat on your scale and zero the scale.
Add salt a little at a time until you reach the desired amount of salt.
Record the exact amount of salt that you used., If the salt does not immediately dissolve, try mixing it with a spoon or spatula.
You need water molecules to come in contact with your salt to dissolve it, and stirring things up helps that happen more quickly.
You can also heat the mixture to help the salt dissolve., When you are analyzing how much salt you can or cannot dissolve into a given volume of water, you should consider the temperature.
Warmer water will dissolve more salt than cooler water, regardless of the type of salt you are using.
If you are doing a formal experiment, you should record the exact temperature of your water., The more solutes (things dissolved into the water) present, the less water molecules are available to interact with your salt.
There can also be interaction between the solutes and the salt, depending on what solutes are present.
If you are not studying the interaction of a specific solute with your salt, it is best to use distilled or deionized water to minimize the amount of contamination., Your water isn’t the only non-perfect substance you’ll be working with.
Your salt is bound to have some level of impurity.
If you purchased your salt, it is likely food or commercial grade and the impurities will be negligible for most experiments.
If you made your own salt or mined your own salt, then impurities might be higher.
About the Author
Kelly Peterson
Kelly Peterson is an experienced writer with over 11 years of expertise in lifestyle and practical guides. Passionate about sharing practical knowledge, Kelly creates easy-to-follow guides that help readers achieve their goals.
Rate This Guide
How helpful was this guide? Click to rate: