How to Prepare Hydrogen and Oxygen by Water Using Acetic Acid

Start with an empty tub., Tape alligator clips to the bottom of the tub., Connect the electrodes.

3 Steps 1 min read Easy

Step-by-Step Guide

  1. Step 1: Start with an empty tub.

    You can use a plastic or glass tub.

    Avoid using a metal tub since you will be running an electrical current through the water.

    The size of the tub does not matter, but a good starting point would be to use a 1⁄2 gallon (1.9 L) container., You will need two alligator clips.

    One will connect to your positive electrode (the anode) and the other will connect to your negative electrode (the cathode).

    Tape one end of each clip to the inside bottom of the tub.

    Make sure to leave enough space so that you can still open and close the clip., You will need two electrodes made from an non-reactive material that conducts electricity well.

    An optimum choice is platinum, but if you don’t have platinum electrodes lying around, you can use graphite.

    Shave the wood off of two pencils to make two graphite rods.

    These rods will make great electrodes.

    Clip one to each alligator clip inside the tub.
  2. Step 2: Tape alligator clips to the bottom of the tub.

  3. Step 3: Connect the electrodes.

Detailed Guide

You can use a plastic or glass tub.

Avoid using a metal tub since you will be running an electrical current through the water.

The size of the tub does not matter, but a good starting point would be to use a 1⁄2 gallon (1.9 L) container., You will need two alligator clips.

One will connect to your positive electrode (the anode) and the other will connect to your negative electrode (the cathode).

Tape one end of each clip to the inside bottom of the tub.

Make sure to leave enough space so that you can still open and close the clip., You will need two electrodes made from an non-reactive material that conducts electricity well.

An optimum choice is platinum, but if you don’t have platinum electrodes lying around, you can use graphite.

Shave the wood off of two pencils to make two graphite rods.

These rods will make great electrodes.

Clip one to each alligator clip inside the tub.

About the Author

K

Kathleen Wilson

Writer and educator with a focus on practical home improvement knowledge.

105 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: