How to Use the 4C Cap‐It Liquid Water Enhancer Product

Step-by-Step Guide

1. 1

   Step 1: Obtain a bottle of spring water that you can easily hold in your hand and that has a twist-on top.

   Don't try to get those huge milk jug-like containers of spring water that most stores sell.
2. 2

   Step 2: Take out a fresh new 4C Cap-It product from it's clean fresh bag inside the product's box.

   , If the jug has an additional inner rim/seal, you must remove that ring too (which can present a challenge to many). ,, Grip the cap in about the center with a tiny bit more force to remove the suction from the cap to the remainder of the product. ,, This will break the seal that formerly held the flavoring to the product.
   
   It'll feel like your pushing down on a hydraulic system, but don't let this fool you; there's no hydraulics at work here. , Finish with the spout in the down position. , This will greatly help to prevent any extra staining from an upcoming step. , The flavoring will spread over the entire jug, and that's what you are looking for. ,
3. 3

   Step 3: Take off the original cap that is on the water jug.

4. 4

   Step 4: Place the 4C Cap-It cap onto the water jug

5. 5

   Step 5: and twist the cap to secure it in place.

6. 6

   Step 6: Pull the clear plastic outer-covering cap up and off from the new 4C cap.

7. 7

   Step 7: Make sure the jug is over a mat of some sort to prevent staining

8. 8

   Step 8: as the next step is super important.

9. 9

   Step 9: Press down on the cap.

10. 10

    Step 10: Repeat the up and down motions of the outer cap a few more times.

11. 11

    Step 11: Replace the clear cap to the product.

12. 12

    Step 12: Shake the jug.

13. 13

    Step 13: Pull the spout until it's in the "up" position to drink the product

14. 14

    Step 14: just like any other water jug sport cap would.

Detailed Guide

About the Author