How to Make a Duck Costume
Get a yellow or white baseball cap., Trace the shape of the visor onto orange felt., Glue the felt onto the visor., Cut out and attach two felt circles for nostrils., Glue two white pom-poms to the front of the cap., Cut out and attach two more felt...
Step-by-Step Guide
-
Step 1: Get a yellow or white baseball cap.
Use a white cap if you want to make an adult duck costume and a yellow cap if you want to make a duckling costume. -
Step 2: Trace the shape of the visor onto orange felt.
Lay the visor of the cap flat on top of a piece of orange craft felt.
Draw around the visor, leaving a 1 inch (2.5 cm) margin between the edge of the visor and the pencil mark.Repeat this step once so that you have two visor-shaped pieces of orange felt.
Note that the visor and the pieces of felt will be used to make the beak of the duck costume. , Cut out both beak pieces of orange felt.
Use a glue stick or hot glue gun to adhere the felt to the visor of the cap.
One piece should go on top, and the other piece should go on the bottom.
The overlap should slightly hang over the front of the visor.
If desired, glue the excess felt overlap of the bottom and top pieces together after securing them onto the visor itself. , Use black felt.
Each circle should be 1/2 inch (1.25 cm) in diameter.
Position the two circles at the center top of the beak.
They should be placed near the crown portion of the cap, but still on the beak or visor portion.
The circles should be placed about 1/2 inch (1.25 cm) to 1 inch (2.5 cm) apart from one another, with the middle point between the two circles being the center top of the beak. , Place each pom-pom on the crown portion of the cap.
Each one should be about 1 inch (2.5 cm) to the outer side of either nostril and 1/2 inch (1.25 cm) up and away from the visor. , Cut out two more 1/2 inch (1.25 cm) circles of black felt.
Use hot glue to attach these circles to the center front of your two white pom-poms.
This step finishes your duck cap.
Set the cap aside as you work on the rest of your costume. , Find the shoes that you intend to wear with your duck costume.
Place each shoe on top of another sheet of orange felt and trace around it in pencil, leaving a 1 inch (2.5 cm) margin between the side of the shoe and the pencil mark.
Note that you need to do this with each sneaker so that you will have a foot traced out for both feet.
For best results, use a thin shoe for this.
You will need to fit a sock on top of this shoe, and doing so might be difficult if you have bulky shoes on.
Alternatively, you can skip this procedure altogether and take a shortcut.
Instead of making specific duck feet, wear orange rain boots with your costume. , Sketch out three triangular points at the top of each foot design.
These points should look like the webbed toes of a duck. , Use sharp scissors to cut around the outline of each duck foot.
Note that you may still see pencil marks on the felt feet after you cut them out.
If so, simply designate the marked side of the felt as the bottom side of the foot. , Carefully and evenly fold each duck foot in half lengthwise.
Make three cuts into the fold toward the back of the foot: one perpendicular to the fold, one diagonal and to the right of your first cut, and one diagonal and to the left of your first cut.
When you unfold the feet, you should notice an asterisk shape on the duck's foot.
Each cut should be about half the width of the widest part of your foot or ankle.
You need the opening of each duck foot to fit over your real foot, but you do not want the cut to be so large that it slips off your foot or wrecks the felt. , Stick one side of a Velcro strip to the bottom of the duck foot, somewhere near the middle.
Apply the corresponding strip of Velcro to an orange sock you plan on wearing with the costume, positioning it where the other piece of Velcro will fall out.
When choosing socks for your costume, look for socks that are a size larger than usual or otherwise a little loose.
These socks will need to be able to fit over your shoes.
This step completes your duck feet.
Set them aside as you work on the rest of your costume. , Bunch up the poly-fil until you can gather a thick cylinder's worth that is about as wide as your waist (or the waist of the intended wearer).
The polyfill is not strictly necessary, but adding it will produce a plumper, more rounded duck costume, so it is strongly recommended. , Turn a white sweatshirt inside out and place the cylinder of polyfill along the inside back of the shirt.
Tape the stuffing in place with masking tape.
Note that the white sweatshirt you use should be long enough to cover your rear.
The stuffing will be added to the stretch of sweatshirt between the bottom of the shirt and the waistline of your pants.
You might find it helpful to try the sweatshirt on after you add the filling to see how it looks.
Remove or add more filling as necessary to get a smooth yet plump look you can deal with. , Trace three skinny almond shapes onto white felt, each one measuring roughly 12 inches (30.5 cm) long and 3 inches (7.6 cm) wide at the thickest point.
Tape or glue the top 3 inches (7.6 cm) of each tail feather to the inside of the center back of your sweatshirt.
Each feather should connect at the same point on the sweatshirt yet fan out in different directions from underneath the sweatshirt bottom. , You will need a separate rectangle of 21 by 8 inch (53.3 by
20.3 cm) white felt for each wing.
To make a wing:
Fold the rectangle in half, shortening it from 21 inches (53.3 cm) to
10.5 inches (26.7 cm).
Trace a simple three or four feathered wing shape onto the felt.
The ends of the feathers should point away from the folded part of the felt.
Cut the shape out.
Leave the folded edge uncut.
Glue or tape the tips of the wings together, but leave enough room on the inside of the wing, near the fold, to slip the sweatshirt sleeve through.
Repeat for the second wing. , Slip the sweatshirt on temporarily.
Slide the wings through your sweatshirt arms so that the feathers point down when you hold your arms out.
Tape or glue in place. , Place the boa over one arm and cut off enough to extend from the shoulder to the tip of the sleeve.
Place the rest of the boa over the other arm and repeat, giving yourself another arm's length of feathers.
Use a hot glue gun or a needle and thread to attach the feather boa strips to each arm of the sweatshirt.
Make sure that the feathers will be positioned on the top of the sleeves, rather than on the bottom or along the sides. , Cut off the appropriate length with sharp scissors.
As with the sleeves, use hot glue or a needle and thread to attach these feathers to the front of the sweatshirt chest. , If you still have feathers left from the boa, you can glue up to 5 inches (12.7 cm) of boa to the top crown of your duck cap. , Slip the sweatshirt on, being careful to avoid knocking off any of the felt or feathers.
If the sweatshirt feels uncomfortable, you could wear a separate shirt beneath it.
Make sure that the under-shirt cannot be seen once you put the sweatshirt on.
If it can be seen, choose a shirt that matches the color of your costume's body: white for the adult duck, yellow for the duckling. , Most duck and duckling legs are orange, so to mimic the appearance of duck legs, you will need to wear orange leggings.
If you are uncomfortable with actual leggings, use orange sweatpants or orange yoga pants.
You could also use orange dye to color an old pair of white jeans or other lightly colored structured pants. , Slip your shoes on.
Place your orange Velcro socks over the shoes, and slide the orange duck feet over the socks and above your foot.
Fix the duck feet in place by pressing the Velcro squares onto the Velcro of your socks. , Place the duck cap on your head.
Adjust as necessary to make it feel comfortable. , Take a look in the mirror and straighten out any aspect of the costume that seems off-balance.
Once you finish, your duck costume is complete and ready to show off. -
Step 3: Glue the felt onto the visor.
-
Step 4: Cut out and attach two felt circles for nostrils.
-
Step 5: Glue two white pom-poms to the front of the cap.
-
Step 6: Cut out and attach two more felt circles for pupils.
-
Step 7: Trace around each shoe onto a piece of felt.
-
Step 8: Make three webbed toes.
-
Step 9: Cut out each foot shape.
-
Step 10: Cut an opening for the feet.
-
Step 11: Apply Velcro to the duck feet and to your socks.
-
Step 12: Gather a thick amount of polyfill.
-
Step 13: Tape the polyfill into a white sweatshirt.
-
Step 14: Cut out and attach white felt tail feathers.
-
Step 15: Design two wings.
-
Step 16: Attach the wings to the sweatshirt arms.
-
Step 17: Attach part of a yellow feather boa to the arms of a yellow sweatshirt.Hold the feather boa up to the sweatshirt you plan on using for the costume.
-
Step 18: Apply more feathers to the upper chest.If you have enough length left from the original feather boa
-
Step 19: drape the boa over the front of the chest
-
Step 20: covering the distance between your two feathered shoulders and curving down below the neckline of the shirt.
-
Step 21: Consider adding a few more feathers to the duck cap.
-
Step 22: Put on the duck or duckling body.
-
Step 23: Add orange leggings.
-
Step 24: Put on shoes
-
Step 25: then duck-feet socks.
-
Step 26: Top it off with the duck cap.
-
Step 27: Admire your work.
Detailed Guide
Use a white cap if you want to make an adult duck costume and a yellow cap if you want to make a duckling costume.
Lay the visor of the cap flat on top of a piece of orange craft felt.
Draw around the visor, leaving a 1 inch (2.5 cm) margin between the edge of the visor and the pencil mark.Repeat this step once so that you have two visor-shaped pieces of orange felt.
Note that the visor and the pieces of felt will be used to make the beak of the duck costume. , Cut out both beak pieces of orange felt.
Use a glue stick or hot glue gun to adhere the felt to the visor of the cap.
One piece should go on top, and the other piece should go on the bottom.
The overlap should slightly hang over the front of the visor.
If desired, glue the excess felt overlap of the bottom and top pieces together after securing them onto the visor itself. , Use black felt.
Each circle should be 1/2 inch (1.25 cm) in diameter.
Position the two circles at the center top of the beak.
They should be placed near the crown portion of the cap, but still on the beak or visor portion.
The circles should be placed about 1/2 inch (1.25 cm) to 1 inch (2.5 cm) apart from one another, with the middle point between the two circles being the center top of the beak. , Place each pom-pom on the crown portion of the cap.
Each one should be about 1 inch (2.5 cm) to the outer side of either nostril and 1/2 inch (1.25 cm) up and away from the visor. , Cut out two more 1/2 inch (1.25 cm) circles of black felt.
Use hot glue to attach these circles to the center front of your two white pom-poms.
This step finishes your duck cap.
Set the cap aside as you work on the rest of your costume. , Find the shoes that you intend to wear with your duck costume.
Place each shoe on top of another sheet of orange felt and trace around it in pencil, leaving a 1 inch (2.5 cm) margin between the side of the shoe and the pencil mark.
Note that you need to do this with each sneaker so that you will have a foot traced out for both feet.
For best results, use a thin shoe for this.
You will need to fit a sock on top of this shoe, and doing so might be difficult if you have bulky shoes on.
Alternatively, you can skip this procedure altogether and take a shortcut.
Instead of making specific duck feet, wear orange rain boots with your costume. , Sketch out three triangular points at the top of each foot design.
These points should look like the webbed toes of a duck. , Use sharp scissors to cut around the outline of each duck foot.
Note that you may still see pencil marks on the felt feet after you cut them out.
If so, simply designate the marked side of the felt as the bottom side of the foot. , Carefully and evenly fold each duck foot in half lengthwise.
Make three cuts into the fold toward the back of the foot: one perpendicular to the fold, one diagonal and to the right of your first cut, and one diagonal and to the left of your first cut.
When you unfold the feet, you should notice an asterisk shape on the duck's foot.
Each cut should be about half the width of the widest part of your foot or ankle.
You need the opening of each duck foot to fit over your real foot, but you do not want the cut to be so large that it slips off your foot or wrecks the felt. , Stick one side of a Velcro strip to the bottom of the duck foot, somewhere near the middle.
Apply the corresponding strip of Velcro to an orange sock you plan on wearing with the costume, positioning it where the other piece of Velcro will fall out.
When choosing socks for your costume, look for socks that are a size larger than usual or otherwise a little loose.
These socks will need to be able to fit over your shoes.
This step completes your duck feet.
Set them aside as you work on the rest of your costume. , Bunch up the poly-fil until you can gather a thick cylinder's worth that is about as wide as your waist (or the waist of the intended wearer).
The polyfill is not strictly necessary, but adding it will produce a plumper, more rounded duck costume, so it is strongly recommended. , Turn a white sweatshirt inside out and place the cylinder of polyfill along the inside back of the shirt.
Tape the stuffing in place with masking tape.
Note that the white sweatshirt you use should be long enough to cover your rear.
The stuffing will be added to the stretch of sweatshirt between the bottom of the shirt and the waistline of your pants.
You might find it helpful to try the sweatshirt on after you add the filling to see how it looks.
Remove or add more filling as necessary to get a smooth yet plump look you can deal with. , Trace three skinny almond shapes onto white felt, each one measuring roughly 12 inches (30.5 cm) long and 3 inches (7.6 cm) wide at the thickest point.
Tape or glue the top 3 inches (7.6 cm) of each tail feather to the inside of the center back of your sweatshirt.
Each feather should connect at the same point on the sweatshirt yet fan out in different directions from underneath the sweatshirt bottom. , You will need a separate rectangle of 21 by 8 inch (53.3 by
20.3 cm) white felt for each wing.
To make a wing:
Fold the rectangle in half, shortening it from 21 inches (53.3 cm) to
10.5 inches (26.7 cm).
Trace a simple three or four feathered wing shape onto the felt.
The ends of the feathers should point away from the folded part of the felt.
Cut the shape out.
Leave the folded edge uncut.
Glue or tape the tips of the wings together, but leave enough room on the inside of the wing, near the fold, to slip the sweatshirt sleeve through.
Repeat for the second wing. , Slip the sweatshirt on temporarily.
Slide the wings through your sweatshirt arms so that the feathers point down when you hold your arms out.
Tape or glue in place. , Place the boa over one arm and cut off enough to extend from the shoulder to the tip of the sleeve.
Place the rest of the boa over the other arm and repeat, giving yourself another arm's length of feathers.
Use a hot glue gun or a needle and thread to attach the feather boa strips to each arm of the sweatshirt.
Make sure that the feathers will be positioned on the top of the sleeves, rather than on the bottom or along the sides. , Cut off the appropriate length with sharp scissors.
As with the sleeves, use hot glue or a needle and thread to attach these feathers to the front of the sweatshirt chest. , If you still have feathers left from the boa, you can glue up to 5 inches (12.7 cm) of boa to the top crown of your duck cap. , Slip the sweatshirt on, being careful to avoid knocking off any of the felt or feathers.
If the sweatshirt feels uncomfortable, you could wear a separate shirt beneath it.
Make sure that the under-shirt cannot be seen once you put the sweatshirt on.
If it can be seen, choose a shirt that matches the color of your costume's body: white for the adult duck, yellow for the duckling. , Most duck and duckling legs are orange, so to mimic the appearance of duck legs, you will need to wear orange leggings.
If you are uncomfortable with actual leggings, use orange sweatpants or orange yoga pants.
You could also use orange dye to color an old pair of white jeans or other lightly colored structured pants. , Slip your shoes on.
Place your orange Velcro socks over the shoes, and slide the orange duck feet over the socks and above your foot.
Fix the duck feet in place by pressing the Velcro squares onto the Velcro of your socks. , Place the duck cap on your head.
Adjust as necessary to make it feel comfortable. , Take a look in the mirror and straighten out any aspect of the costume that seems off-balance.
Once you finish, your duck costume is complete and ready to show off.
About the Author
Emily Jimenez
Professional writer focused on creating easy-to-follow home improvement tutorials.
Rate This Guide
How helpful was this guide? Click to rate: