How to Build a Pong Table (Dartmouth)

Step-by-Step Guide

1. 1

   Step 1: Obtain your materials

   You may already have some.
2. 2

   Step 2: listed below.

   You will have two pieces left , You now have 2 5'x4' sections, and 2
   2.5'x2' sections.
   
   Your final table will be 5'x10'. , The smaller sections go in the middle, around the divider ,,, Don't be shy, and use several coats to prevent spilled beer and humidity from ruining your table.
   
   Be especially thorough around the edges of the plywood, which are especially absorbent.
   
   It is recommended to seal the whole thing (top, bottom, sides, even the 2x4s) for optimal lifespan. , This step is optional but is the most fun part of the job.
   
   Some people make some pretty intricate paintings on their tables. , The more random the better.
   
   Absolutely DO NOT pay for your divider.
3. 3

   Step 3: Cut each sheet of plywood into a 5'x4' section.

4. 4

   Step 4: With each of the leftover pieces

5. 5

   Step 5: cut them into 2 2.5'x2' sections.

6. 6

   Step 6: The larger sections will go at the ends of the table

7. 7

   Step 7: where the cups go and where the players stand.

8. 8

   Step 8: On the underside of the table

9. 9

   Step 9: use 2 of the 2x4s to join and support the side edges of the table

10. 10

    Step 10: and use the leftover plywood to join/support the middle seams.

11. 11

    Step 11: Cut the last 2x4 in half (into two 5' sections) and use each section to line the back edges of the table

12. 12

    Step 12: just like you did for the side edges.

13. 13

    Step 13: Once the table is screwed together fully

14. 14

    Step 14: you will want to seal it with your latex primer.

15. 15

    Step 15: Using roughly 1 qt of your choice of paint (make sure it is compatible with your primer)

16. 16

    Step 16: color/decorate your table.

17. 17

    Step 17: You will need to find something (anything) to use as your divider: 2x4

18. 18

    Step 18: person

Detailed Guide

About the Author