How to Build a Zigalo

Step-by-Step Guide

1. 1

   Step 1: Create the Foundation of the Zigalo.

   Building the foundation of the zigalo is perhaps the most important step in the entire building process.
   
   A strong foundation is helpful; a correctly-built foundation is vital.
2. 2

   Step 2: Purchase (or cut the plywood to) a 12' by 8' rectangle of plywood.

   ,, Each should have a diameter of approximately one centimeter. , Each should be between four and six feet in height and no more than one centimeter in diameter. , If the pole has extra space to move around in the hole, use cement filler to surround the pole, fill in the hole, and restrict all movement of the pole. , These five sheets will make up the five faces of the tent (not the bottom).
   
   These fiberglass sheets should measure the width of the plywood side and the height of the metal poles. , This step is difficult and may require the assistance of a professional.
   
   Next, create a small doorway in one of the sides of the zigalo.
   
   Again, your best bet is to leave this to a professional. , This is very important, as it will allow ample air to enter and exit the zigalo. , The overall structure of the zigalo is, at this point, complete.
   
   Design the zigalo in any way you choose.
3. 3

   Step 3: If not already done

4. 4

   Step 4: sand the plywood.

5. 5

   Step 5: Using a drill

6. 6

   Step 6: poke four holes in the corners of the rectangle.

7. 7

   Step 7: Obtain four metal poles.

8. 8

   Step 8: Insert the four poles into the four corners.

9. 9

   Step 9: Obtain five sheets of fiberglass.

10. 10

    Step 10: Fit the fiberglass.

11. 11

    Step 11: Once the six sides have been constructed

12. 12

    Step 12: poke a small hole in the top face of fiberglass.

13. 13

    Step 13: Design the zigalo.

Detailed Guide

About the Author