How to Build Trailers
Find axles., Buy wheels, if your axles did not come with them., Build a trailer frame., Make a trailer tongue., Weld a hitch that is compatible with the vehicle you will use for towing to the tongue of your trailer, where the 2 tips meet. , Attach...
Step-by-Step Guide
-
Step 1: Find axles.
You may use 1 axle or 2, but it is recommended that you use 2, as 2 axles will carry the most weight and give you the best shock absorption.
You have some choices when it comes to searching for axles for custom trailers, so keep the following things in mind:
A junkyard is a great place to find inexpensive axles.
You can make a trailer out of old truck axles or mobile home axles.
The axles you choose should have springs and brakes.
When shopping for axles, keep in mind that you will want to build a trailer that is approximately 100 inches (254 cm) wide.
If you buy axles that are wider than that, you will need to cut out the middle section of them and weld them back together, to the appropriate dimension. -
Step 2: Buy wheels
Use only tires specifically made for trailers.
They should be 15 inches (38 cm) wide and made of bias-ply nylon. , Use 4 inch (10.16 cm) by 4 inch (10.16 cm) steel bars.
Weld sections of steel bar together to make a rectangular frame in the size you desire.
Verify that the frame is a perfect rectangle by checking the corner angles and the cross measurements from one end to the other.
Cut 5 steel bars to the width of the frame using a chop saw with a blade specifically made for cutting metal.
Lay the axles underneath the frame for reference.
They should be 16 inches (40.6 cm) past the center mark, toward the end of the trailer.
Weld the width bars to the frame to provide stability.
Start with the center bar, which should be placed in the middle of the 2 axles.
Weld the next 2 bars at either end.
The remaining 2 should be welded at the spring hanger mounting points. , Use 4 inch (10.16 cm) by 4 inch (10.16 cm) steel bars.
Use the chop saw to cut 2 41 inch (104 cm) lengths of steel bar.
Position the steel bars so that half of them lie underneath the frame and the other half of the extends out the front of the frame.
Weld them to the front of the trailer frame, 1 on each side, angling them so that their ends meet, forming a triangle.
Use the chop saw to cut the tips where the steel bars meet, at the front of the trailer, and weld them together. ,, Flip the trailer frame over so that its underside is facing up.
Lay the 2 axles on the underside of the frame, lining them up so that they are on either side of the center crossbar of the trailer frame.
Weld the spring hangers of the axles to the frame.
Flip the trailer over and finish welding the axles on from the top of the frame. , -
Step 3: if your axles did not come with them.
-
Step 4: Build a trailer frame.
-
Step 5: Make a trailer tongue.
-
Step 6: Weld a hitch that is compatible with the vehicle you will use for towing to the tongue of your trailer
-
Step 7: where the 2 tips meet.
-
Step 8: Attach the axles.
-
Step 9: Cover the frame with heavy gauge metal plates cut to size and weld them in place.
Detailed Guide
You may use 1 axle or 2, but it is recommended that you use 2, as 2 axles will carry the most weight and give you the best shock absorption.
You have some choices when it comes to searching for axles for custom trailers, so keep the following things in mind:
A junkyard is a great place to find inexpensive axles.
You can make a trailer out of old truck axles or mobile home axles.
The axles you choose should have springs and brakes.
When shopping for axles, keep in mind that you will want to build a trailer that is approximately 100 inches (254 cm) wide.
If you buy axles that are wider than that, you will need to cut out the middle section of them and weld them back together, to the appropriate dimension.
Use only tires specifically made for trailers.
They should be 15 inches (38 cm) wide and made of bias-ply nylon. , Use 4 inch (10.16 cm) by 4 inch (10.16 cm) steel bars.
Weld sections of steel bar together to make a rectangular frame in the size you desire.
Verify that the frame is a perfect rectangle by checking the corner angles and the cross measurements from one end to the other.
Cut 5 steel bars to the width of the frame using a chop saw with a blade specifically made for cutting metal.
Lay the axles underneath the frame for reference.
They should be 16 inches (40.6 cm) past the center mark, toward the end of the trailer.
Weld the width bars to the frame to provide stability.
Start with the center bar, which should be placed in the middle of the 2 axles.
Weld the next 2 bars at either end.
The remaining 2 should be welded at the spring hanger mounting points. , Use 4 inch (10.16 cm) by 4 inch (10.16 cm) steel bars.
Use the chop saw to cut 2 41 inch (104 cm) lengths of steel bar.
Position the steel bars so that half of them lie underneath the frame and the other half of the extends out the front of the frame.
Weld them to the front of the trailer frame, 1 on each side, angling them so that their ends meet, forming a triangle.
Use the chop saw to cut the tips where the steel bars meet, at the front of the trailer, and weld them together. ,, Flip the trailer frame over so that its underside is facing up.
Lay the 2 axles on the underside of the frame, lining them up so that they are on either side of the center crossbar of the trailer frame.
Weld the spring hangers of the axles to the frame.
Flip the trailer over and finish welding the axles on from the top of the frame. ,
About the Author
Victoria Morales
Creates helpful guides on cooking to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: