How to Fix a Flat Tire

Step-by-Step Guide

1. 1

   Step 1: Inflate the tire.

   In order to find a leak the tire must be properly pressurized.
   
   You should inflate your tire with air until it reaches the appropriate pressure (measured in psi) specified in your vehicle’s service manual.
2. 2

   Step 2: Visually inspect the tire.

   Before moving on to more time consuming techniques, you should take a moment to look at your tire.
   
   If you notice any holes, cuts, or objects protruding from tire then you have found your leak. , Even if you aren't able to see the problem right away you might be able to hear it.
   
   A hissing sound is a clear sign that air is leaking from your tire, and can help you locate the leak. , If you run your hands over the tire carefully you may feel the leak even if you can't hear or see it. , If you followed the steps above and you were not able to easily find the leak don’t fear.
   
   Spraying the tire with a little soapy water or window cleaner may help.
   
   If you see bubbling at any place on the surface of the tire then you have found your leak., You can use a spray bottle to spray the tire, or if a spray bottle isn’t available you can just pour the mixture over the tire. , As air escapes the tire and encounters the soapy water mixture it will form soap bubbles.
   
   If you notice the soapy water bubbling at any particular place on the tire, you have found your leak.
3. 3

   Step 3: Listen for a hissing sound.

4. 4

   Step 4: Feel around the tire for air.

5. 5

   Step 5: Mix soap and water.

6. 6

   Step 6: Cover the tire with the soap and water solution.

7. 7

   Step 7: Watch for bubbles.

Detailed Guide

About the Author