How to Fix a Leaking Refrigerator

Step-by-Step Guide

1. 1

   Step 1: Unplug the refrigerator.

   A tube or channel usually directs the melted water into a pan at the bottom of the refrigerator.
   
   Check your owner’s manual if you’re not sure where the pan could be located. , In some refrigerators, you will also have to remove the floor panel. ,, Use the bucket or some towels to catch any water that flows from the defroster. , Squeeze or gently move the tube around to feel for frozen or stiff sections. , Run hot air through the tube to dislodge the clog if you’ve found one.
   
   Be sure that there is enough room in the bucket to drain the excess liquid out of the bottom of the tube after the obstruction is cleared and the water from the tap runs freely through. ,
2. 2

   Step 2: Check to find out where your self-defrosting refrigerator drains defrosted water.

3. 3

   Step 3: Remove the cover panel.

4. 4

   Step 4: Once you’ve located it

5. 5

   Step 5: remove the bottom end drain tube or channel from the refrigerator and feed the tube into a bucket to catch any melted water.

6. 6

   Step 6: Remove the upper portion of the drain tube or channel.

7. 7

   Step 7: Use a hair dryer to thaw any frozen areas within the drain tube.

8. 8

   Step 8: Place the upper end of the tube under a faucet.

9. 9

   Step 9: Reattach the drain tube or channel once you’ve finished clearing it.

Detailed Guide

About the Author