How to Fix a Main Gasket With Liquid Glass
Purchase Sodium Silicate (Liquid Glass) from a pharmacy., Drain coolant system by disconnecting the large hose from the bottom of the radiator., Remove the thermostat and reconnect the hose without a thermostat. , Flush the coolant system thoroughly...
Step-by-Step Guide
-
Step 1: Purchase Sodium Silicate (Liquid Glass) from a pharmacy.
Purchase new thermostat and associated thermostat gasket(s). -
Step 2: Drain coolant system by disconnecting the large hose from the bottom of the radiator.
Also disconnect the large hose from the top of the radiator. ,, Run water through the large hose which was disconnected from the top of the radiator and leads to the engine.
Watch the water coming out of the large hose which was disconnected from the bottom of the radiator until it turns clear.
Do the same to the radiator by running water through the top and watching it pour out the bottom. ,, Add the liquid glass and mix thoroughly. , Top off the coolant system with hose water.
Cap the radiator. , Wait until the water level drops in the radiator and top it off again with hose water. , When liquid glass heats up it is activated.
When it cools down by contacting air it will harden as when it seeps out of the leaky gasket. , Wait about 15 minutes and drain the coolant system without burning yourself. , Install the new thermostat with gasket.
Ensure the coolant system is put together properly. , -
Step 3: Remove the thermostat and reconnect the hose without a thermostat.
-
Step 4: Flush the coolant system thoroughly with hose water to remove trace amounts of antifreeze.
-
Step 5: Reconnect all the coolant system hoses and the old thermostat gasket without the thermostat.
-
Step 6: In a container
-
Step 7: pour about a quart of water.
-
Step 8: Add the liquid glass/water mixture to the radiator.
-
Step 9: Start the car and then remove the radiator cap.
-
Step 10: Run for 45 minutes.
-
Step 11: After 45 minutes
-
Step 12: stop the engine.
-
Step 13: Flush the coolant system with hose water thoroughly (see step 4).
-
Step 14: Fill the radiator with 50:50 water:antifreeze.
Detailed Guide
Purchase new thermostat and associated thermostat gasket(s).
Also disconnect the large hose from the top of the radiator. ,, Run water through the large hose which was disconnected from the top of the radiator and leads to the engine.
Watch the water coming out of the large hose which was disconnected from the bottom of the radiator until it turns clear.
Do the same to the radiator by running water through the top and watching it pour out the bottom. ,, Add the liquid glass and mix thoroughly. , Top off the coolant system with hose water.
Cap the radiator. , Wait until the water level drops in the radiator and top it off again with hose water. , When liquid glass heats up it is activated.
When it cools down by contacting air it will harden as when it seeps out of the leaky gasket. , Wait about 15 minutes and drain the coolant system without burning yourself. , Install the new thermostat with gasket.
Ensure the coolant system is put together properly. ,
About the Author
Carolyn Graham
Professional writer focused on creating easy-to-follow pet care tutorials.
Rate This Guide
How helpful was this guide? Click to rate: