How to Fix an Unrecognized iRiver E100 Error

Step-by-Step Guide

1. 1

   Step 1: In Windows XP service pack 2

   Navigate to the "hardware" tab on this window and select "device manager". , Now navigate to "universal serial bus controllers" at the bottom of the list of devices and click the plus icon next to it to expand the list of devices on that category. , One of these devices is conflicting with your device. , Windows should find the device without experiencing the unrecognized device error now.
   
   Remember that this will need to be repeated again if you power on the device in a different port at any point after this. ,,
2. 2

   Step 2: navigate to my computer on your desktop then right click icon for my computer and choose properties.

3. 3

   Step 3: System properties is now open.

4. 4

   Step 4: Device manager is now open.

5. 5

   Step 5: Right click each individual "USB mass storage device" one at a time selecting the option to disable the device.

6. 6

   Step 6: while all USB mass storage devices are disabled

7. 7

   Step 7: you may connect your device to your selected USB port of choice and power the device on.

8. 8

   Step 8: You now need to re-enable all the "USB mass storage devices" that you disabled in step 4 by right clicking each one individually and selecting enable.

9. 9

   Step 9: Any help permanently fixing this problem so that the device can be used on any usb port connected to the pc would be greatly appreciated thanks Microsoft for letting me do all the hard work none of your solutions were effective.

Detailed Guide

About the Author