How to Glue a Puzzle
Acquire your materials., Lay out parchment paper over your work area., Position your puzzle on the parchment paper., Add glue to the center of your puzzle., Spread the glue evenly over your puzzle., Remove any globs of glue from the puzzle., Allow...
Step-by-Step Guide
-
Step 1: Acquire your materials.
To ensure the glue you use doesn't cloud the surface of your puzzle, flake, or cause damage, you should use specially intended puzzle glue for gluing your puzzle.
This can be bought at most craft and hobby stores.
In all, for this project you'll need:
Puzzle glue Paintbrush (or sponge) Parchment paper (or wax paper) Any clear adhesive, like shellac or decoupage glue, can be used to glue your puzzle together, though some glues might leave a cloudy finish or not glue as firmly as puzzle glue. -
Step 2: Lay out parchment paper over your work area.
You'll want to work on a level, clear space while gluing your puzzle.
Sometimes, glue can seep between puzzle pieces, causing the pieces to stick to your work surface.
To prevent this, you should put a layer of parchment paper between your puzzle and the surface on which you're working.The parchment paper you lay beneath your puzzle should extend several inches beyond its outer edges.
If you don't have parchment paper handy, you could also use wax paper to prevent puzzle pieces from sticking to your work surface. , If you are able, slide your puzzle over the top of your parchment paper.
If this is not possible, you may need to get a thin, stiff piece of card stock to slide underneath your puzzle to help you transfer it to the parchment paper.
At this point, your puzzle should be facing picture side up atop your parchment (or wax) paper, and your paper should extend a few inches beyond the outer edges of the puzzle., To ensure an even layer of glue is spread over your puzzle, you should start at the center of the puzzle and work your way to its outer edges.
Start with a moderate amount of glue first.
You can always add more later, if necessary.
Working from the center of the puzzle out will also help prevent you from using too much glue, which can cause unevenness in the glue., Add your glue a little bit at a time and use your paintbrush or sponge to spread your glue from the center to the outer corners of your puzzle.
You should only need a thin layer of glue to hold the puzzle pieces together.
Adding too much glue to your puzzle can sometimes cause the pieces to curl when the glue is dried.Some brands of puzzle glue come with a plastic glue spreader that you can use to distribute your glue over the surface of your puzzle.
If you find that a brush or a sponge doesn't work well for spreading glue and if your puzzle glue did not come with a spreader, you may be able to use a plastic spatula to distribute the glue more quickly.
However, dried glue can be difficult to remove from your spatula once you are finished. , In many cases, when you reach the edges of your puzzle, you'll find that you have some excess glue.
Remove this by pushing it off the edges onto the parchment paper with your paintbrush, sponge, or plastic spreader.If you are using a plastic spreader/spatula, you may be able to remove extra glue by scooping it up and wiping it onto a piece of paper towel. , Depending your the brand of puzzle glue you have bought, this may only take a few hours or may require an entire night to dry.
When waiting for your puzzle to dry, it's best to err on the side of caution.
Moving your puzzle too soon can cause wet glue to deform the puzzle pieces.
You should check the label instructions for your glue to determine the amount of time your glue needs to dry., The bond created by your glue on the front of your puzzle should allow you to easily pick up the puzzle by hand and turn it so the cardboard side of the puzzle is facing up.
Larger puzzles can sometimes be more unstable.
In this case, you might want to use a piece of cardboard or stiff card stock under the puzzle to provide stability while flipping.Glue can often seep between the spaces between puzzle pieces.
When this happens, gently peel the puzzle free of the wax paper before flipping it.
For especially stubborn glue, you might need to use a firm plastic edge, like a spatula, to break the bond between the puzzle and the parchment paper.
Use firm but gentle pressure when doing this.
After you flip your puzzle, you should reinsert parchment paper beneath it to prevent glue from sticking pieces to your work surface. , Add a moderate amount of glue to the center of your puzzle and spread a thin layer toward the edges using your paint brush or sponge.
Much like when gluing the front of your puzzle, you should aim for a thin, even coat of glue.You should add glue to your puzzle a little bit at a time to prevent wasting glue and to ensure a thin, even coating over the pieces. , Once you reach the outer edges of your puzzle, you'll likely have some extra glue left over.
Use your paintbrush or sponge to push this glue off the edges of the puzzle and onto the parchment paper., Once the glue on the back of your puzzle is fully dry, your puzzle should be firmly connected together.
In many cases, this will be stable enough that you won't have to worry about framing or mounting your puzzle if displaying it on a flat surface.
However, framing or mounting your puzzle can provide even more stability to puzzles you plan to hang., Over time, the glue of your puzzle will deteriorate naturally.
This can cause pieces to come loose and become lost.
To ensure your puzzle stays in one piece, you should mount or frame it when hanging.You should consider mounting your puzzle especially if you are planning on moving it to a different location.
If the puzzle is bent, the glue can crack or cause the puzzle to warp.
A rigid backing will prevent this from happening. , With a piece of plain cardboard that is larger than your puzzle, you can make an effective mount.
Simply take your puzzle glue and apply a moderate amount to the back of your puzzle.
Lay your glued puzzle onto the cardboard.
Allow the glue to dry, then:
Take a utility knife and cut the excess cardboard free from your puzzle.
Do this by cutting with your utility knife around the border of the puzzle. , A sturdy, relatively thin foam board is often attached to the back of puzzles before framing.
Foam board will have more flex than other kinds of mounting material.
This can make your puzzle easier to insert into a frame.
There are many kinds of foam board you might use to mount your puzzle.
These are often available at hobby or craft stores.
If you are unsure if the foam board you selected for mounting your puzzle is thin/sturdy enough, the service representative of your local hobby/craft store should be able to offer advice., A frame can give your finished, glued puzzle the appearance of a work of art.
First you'll need to measure your puzzle dimensions and purchase a frame that will fit it.
Lay your puzzle inside the frame and seal the back of the frame to protect and showcase your puzzle.Most frames come with catches or tabs at the back that can be used to either hold the puzzle in place or to sandwich the puzzle between the glass of the frame and a piece of cardboard.
If you're trying to save money, you may be able to find a suitable, inexpensive frame at a secondhand store and re-purpose the frame for your puzzle. -
Step 3: Position your puzzle on the parchment paper.
-
Step 4: Add glue to the center of your puzzle.
-
Step 5: Spread the glue evenly over your puzzle.
-
Step 6: Remove any globs of glue from the puzzle.
-
Step 7: Allow the glue to dry.
-
Step 8: Flip your puzzle.
-
Step 9: Glue your puzzle from the center out.
-
Step 10: Push excess glue off the edges of the puzzle.
-
Step 11: Allow the glue to fully dry.
-
Step 12: Avoid hanging a puzzle without mounting.
-
Step 13: Use a simple cardboard mount.
-
Step 14: Mount your puzzle to foam board when framing.
-
Step 15: Frame your puzzle.
Detailed Guide
To ensure the glue you use doesn't cloud the surface of your puzzle, flake, or cause damage, you should use specially intended puzzle glue for gluing your puzzle.
This can be bought at most craft and hobby stores.
In all, for this project you'll need:
Puzzle glue Paintbrush (or sponge) Parchment paper (or wax paper) Any clear adhesive, like shellac or decoupage glue, can be used to glue your puzzle together, though some glues might leave a cloudy finish or not glue as firmly as puzzle glue.
You'll want to work on a level, clear space while gluing your puzzle.
Sometimes, glue can seep between puzzle pieces, causing the pieces to stick to your work surface.
To prevent this, you should put a layer of parchment paper between your puzzle and the surface on which you're working.The parchment paper you lay beneath your puzzle should extend several inches beyond its outer edges.
If you don't have parchment paper handy, you could also use wax paper to prevent puzzle pieces from sticking to your work surface. , If you are able, slide your puzzle over the top of your parchment paper.
If this is not possible, you may need to get a thin, stiff piece of card stock to slide underneath your puzzle to help you transfer it to the parchment paper.
At this point, your puzzle should be facing picture side up atop your parchment (or wax) paper, and your paper should extend a few inches beyond the outer edges of the puzzle., To ensure an even layer of glue is spread over your puzzle, you should start at the center of the puzzle and work your way to its outer edges.
Start with a moderate amount of glue first.
You can always add more later, if necessary.
Working from the center of the puzzle out will also help prevent you from using too much glue, which can cause unevenness in the glue., Add your glue a little bit at a time and use your paintbrush or sponge to spread your glue from the center to the outer corners of your puzzle.
You should only need a thin layer of glue to hold the puzzle pieces together.
Adding too much glue to your puzzle can sometimes cause the pieces to curl when the glue is dried.Some brands of puzzle glue come with a plastic glue spreader that you can use to distribute your glue over the surface of your puzzle.
If you find that a brush or a sponge doesn't work well for spreading glue and if your puzzle glue did not come with a spreader, you may be able to use a plastic spatula to distribute the glue more quickly.
However, dried glue can be difficult to remove from your spatula once you are finished. , In many cases, when you reach the edges of your puzzle, you'll find that you have some excess glue.
Remove this by pushing it off the edges onto the parchment paper with your paintbrush, sponge, or plastic spreader.If you are using a plastic spreader/spatula, you may be able to remove extra glue by scooping it up and wiping it onto a piece of paper towel. , Depending your the brand of puzzle glue you have bought, this may only take a few hours or may require an entire night to dry.
When waiting for your puzzle to dry, it's best to err on the side of caution.
Moving your puzzle too soon can cause wet glue to deform the puzzle pieces.
You should check the label instructions for your glue to determine the amount of time your glue needs to dry., The bond created by your glue on the front of your puzzle should allow you to easily pick up the puzzle by hand and turn it so the cardboard side of the puzzle is facing up.
Larger puzzles can sometimes be more unstable.
In this case, you might want to use a piece of cardboard or stiff card stock under the puzzle to provide stability while flipping.Glue can often seep between the spaces between puzzle pieces.
When this happens, gently peel the puzzle free of the wax paper before flipping it.
For especially stubborn glue, you might need to use a firm plastic edge, like a spatula, to break the bond between the puzzle and the parchment paper.
Use firm but gentle pressure when doing this.
After you flip your puzzle, you should reinsert parchment paper beneath it to prevent glue from sticking pieces to your work surface. , Add a moderate amount of glue to the center of your puzzle and spread a thin layer toward the edges using your paint brush or sponge.
Much like when gluing the front of your puzzle, you should aim for a thin, even coat of glue.You should add glue to your puzzle a little bit at a time to prevent wasting glue and to ensure a thin, even coating over the pieces. , Once you reach the outer edges of your puzzle, you'll likely have some extra glue left over.
Use your paintbrush or sponge to push this glue off the edges of the puzzle and onto the parchment paper., Once the glue on the back of your puzzle is fully dry, your puzzle should be firmly connected together.
In many cases, this will be stable enough that you won't have to worry about framing or mounting your puzzle if displaying it on a flat surface.
However, framing or mounting your puzzle can provide even more stability to puzzles you plan to hang., Over time, the glue of your puzzle will deteriorate naturally.
This can cause pieces to come loose and become lost.
To ensure your puzzle stays in one piece, you should mount or frame it when hanging.You should consider mounting your puzzle especially if you are planning on moving it to a different location.
If the puzzle is bent, the glue can crack or cause the puzzle to warp.
A rigid backing will prevent this from happening. , With a piece of plain cardboard that is larger than your puzzle, you can make an effective mount.
Simply take your puzzle glue and apply a moderate amount to the back of your puzzle.
Lay your glued puzzle onto the cardboard.
Allow the glue to dry, then:
Take a utility knife and cut the excess cardboard free from your puzzle.
Do this by cutting with your utility knife around the border of the puzzle. , A sturdy, relatively thin foam board is often attached to the back of puzzles before framing.
Foam board will have more flex than other kinds of mounting material.
This can make your puzzle easier to insert into a frame.
There are many kinds of foam board you might use to mount your puzzle.
These are often available at hobby or craft stores.
If you are unsure if the foam board you selected for mounting your puzzle is thin/sturdy enough, the service representative of your local hobby/craft store should be able to offer advice., A frame can give your finished, glued puzzle the appearance of a work of art.
First you'll need to measure your puzzle dimensions and purchase a frame that will fit it.
Lay your puzzle inside the frame and seal the back of the frame to protect and showcase your puzzle.Most frames come with catches or tabs at the back that can be used to either hold the puzzle in place or to sandwich the puzzle between the glass of the frame and a piece of cardboard.
If you're trying to save money, you may be able to find a suitable, inexpensive frame at a secondhand store and re-purpose the frame for your puzzle.
About the Author
William Torres
Enthusiastic about teaching hobbies techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: