How to Install a Bird Feeder or Bird House

Step-by-Step Guide

1. 1

   Step 1: Make sure all the parts and tools you need for the install are present.

   See the "Things You'll Need" section below.
2. 2

   Step 2: Prep the pole for mounting.

   Resting the socket on a table, insert the pole into the socket, making sure the pole is fully inserted.
   
   Now, use a marker to mark all mounting holes. , (Use a bit smaller in diameter than the screws.) , Once you have selected a suitable location, start hand screwing the socket into the ground.
   
   Soaking the ground or installing after a heavy rain makes it easier. , Screw the socket till it's flush with the ground. , Secure it with the mounting screws. , It doesn't have to be screwed in yet. , (Seed can be added to feeder at this time.) , Then secure the baffle to the pole.
   
   The baffle should be mounted as close to feeder as possible. , Don't forget the finial on top of the roof.
3. 3

   Step 3: Once marked

4. 4

   Step 4: drill holes for the mounting screws.

5. 5

   Step 5: Find a place to mount the feeder.

6. 6

   Step 6: Use your crowbar

7. 7

   Step 7: or something similar in weight and size

8. 8

   Step 8: to get leverage.

9. 9

   Step 9: After the socket is flush

10. 10

    Step 10: insert the pole.

11. 11

    Step 11: Once the pole is secure

12. 12

    Step 12: slide the baffle over the pole.

13. 13

    Step 13: Place the feeder or house onto the pole.

14. 14

    Step 14: Secure the feeder or house to the pole.

15. 15

    Step 15: Finally

16. 16

    Step 16: stand back and enjoy your new bird feeder or house.

Detailed Guide

About the Author