How to Install a Module in Miva Merchant

Step-by-Step Guide

1. 1

   Step 1: Read the README file or other installation file that comes with the module for any special instructions not shown here.

   If you are in Simple Administration mode, click Switch to Advanced Administration on the top right of the screen. ,,, A window will open to browse your hard drive for the proper file to upload. , Then click Upload. , Click Update to install the module. , On the resulting screen, note the Type of Module shown.
   
   This tells you where to go next to assign the module to your store.
   
   Whatever it says, scroll down the left menu and look for the link with that name.
   
   For example, if it says, "System Configuration," then you scroll down and click on System Extension Configuration. , Click the Check Box, and then hit the Update button. , Click the link.
   
   You'll most likely have to enter a license key and click Update to activate.
   
   Once you do that, you're finished!
2. 2

   Step 2: Sign in to your Miva Merchant admin area.

3. 3

   Step 3: In the left menu

4. 4

   Step 4: click on the arrow next to the word Modules.

5. 5

   Step 5: Click on Add Module link directly under Modules.

6. 6

   Step 6: In the right frame

7. 7

   Step 7: click on the icon next to the Module field.

8. 8

   Step 8: Click the Browse button

9. 9

   Step 9: select the file from your hard drive where you saved it after buying it.

10. 10

    Step 10: When the window closes

11. 11

    Step 11: the file is uploaded and you're returned to the Add Module window.

12. 12

    Step 12: You're not finished yet!

13. 13

    Step 13: In the right frame

14. 14

    Step 14: you'll see the new module name with an empty check box on the left of the name.

15. 15

    Step 15: After the page reloads

16. 16

    Step 16: you'll see a link for the module at the top.

Detailed Guide

About the Author