How to Install a Nest Learning Thermostat

Step-by-Step Guide

1. 1

   Step 1: Before you install the thermostat

   You should have: the Nest display (comes with Nest) the base (comes with Nest) an optional trim base (comes with Nest) an optional trim plate (comes with Nest) a screwdriver (comes with Nest) wall screws (comes with Nest) optional steel plate screws (comes with Nest) blue and white wire labels pliers a wi-fi connection a smart phone bubble level (if you want the thermostat to be level)
2. 2

   Step 2: you will need to collect a few items.

   Either turn off the heating and cooling system by adjusting the temperature on your old Thermostat to off or turn off your main power switch.
   
   Failure to do so might result in blowing a fuse.,, The Nest Thermostat will have a similar wire set-up., Jumper wires are used to link connectors of the device., You will find that the wires are assigned a Letter and/or number.
   
   Attach the blue and white labels to the corresponding wire.,,, Grab your level.
   
   Rest the level on the top of the Nest.
   
   Maneuver the base, until the bubble falls within the lines. With a pencil mark where you will screw the base onto the wall., Then pull the wires through the opening in the base., Make sure you consult the labels.
   
   If you are having problems, consult the picture you tool earlier.
   
   Once connected straighten out the exposed wire and make sure that there is no space between the wire and base., Do not push hard.
   
   The device will click when the connection is made.,,
3. 3

   Step 3: Turn off your old thermostat.

4. 4

   Step 4: Remove the cover of the old thermostat.

5. 5

   Step 5: Before you dive into disconnecting wires

6. 6

   Step 6: take a quick pic of the current set-up.

7. 7

   Step 7: Remove jumper wires.

8. 8

   Step 8: Grab the blue and white wire labels.

9. 9

   Step 9: Unscrew or push a button to remove the wires.

10. 10

    Step 10: Remove the back plate of the old thermostat from the wall.

11. 11

    Step 11: Hold the base up to the wall.

12. 12

    Step 12: Screw in the base.

13. 13

    Step 13: Connect the wires to the new thermostat.

14. 14

    Step 14: Attach the display to the base.

15. 15

    Step 15: Turn on the power.

16. 16

    Step 16: The thermostat will walk you through the rest.

Detailed Guide

About the Author