How to Install an Aftermarket Air Intake
Determine the exact specifications of your car., Research the types of intakes available and choose the one that fits your needs best., Park your car., Wait until your engine has cooled completely before doing anything., Unplug the car battery...
Step-by-Step Guide
-
Step 1: Determine the exact specifications of your car.
If you own a commonly customized car, such as a Honda Civic or a Volkswagen Jetta, you will likely need only your model, year, and engine type.
If your car is less commonly modified, it may be harder to find aftermarket parts. -
Step 2: Research the types of intakes available and choose the one that fits your needs best.
Short-pipe intakes are the simplest design to install, but offer the least benefits in terms of horsepower, torque, and gas mileage.
They pull hot air directly from within the engine compartment into the engine.
Cold air intakes pull cool air from places outside the engine compartment such as around the wheel well or bumper.
These are a bit more complicated to install since you may have to install part of the intake from underneath the car.
The cooler air is denser than the air inside the engine compartment so it gives a better boost to performance and gas mileage than short-pipe designs.
Ram-air intakes usually pull cool air from the bumper area.
Because they are designed to be at the front of the car, they actually pressurize the cool air coming into the engine as the car moves faster.
This provides maximum airflow and maximum benefits.
It is also the most complicated to install since you will likely have to install part of the system from underneath the car.
You may even have to remove your bumper., You should choose an area that has plenty of space for you to move around the front and sides of your vehicle.
You also want a well-lit area so that you can see what you are doing.
Be sure to turn your vehicle off before proceeding. , Parts in the engine compartment can get very hot when the car is running.You do not want to get burned. , Start by removing the negative terminal (black or unmarked) and then remove the positive terminal (red). , This should be easy to identify.
It will look like a large plastic tube running from the engine to a large plastic filter box. , This consists of removing the air filter, the filter box, and the tube running from the filter box to the opening in the engine bay.
Some of these parts will be attached to the engine bay by small plastic mounts.
You will need a wrench or socket set to remove the small bolt holding the mounts in place.
Some pieces of the intake system are fastened to each other with hose clamps, which can be loosened by turning the small bolt on the end with a screwdriver or socket.
You may need to remove one or more air sensors which feed information to the car's computer.
These should be handled very delicately. , If the new intake you purchased is damaged or doesn’t fit, you will have to re-install the original intake system before driving your car.
Set the intake aside until you know the new one works properly. , You should follow the specific manufacturer’s instructions as to which piece to install first.
Be sure to secure the intake with hose clamps where appropriate.
Carefully re-install any sensors removed with the old intake.
Once the new intake is installed, install a new air filter.
Remember that if you purchased a cold air or ram air intake, you will likely need to climb under the car to complete the installation as these systems pull cool air from outside the engine compartment. , If the intake easily strikes other objects in the engine bay, tighten the mountings until it is secure. , You should attach the red (positive) terminal first.
Next, attach the black (negative/ground) terminal. , You want to make sure that the intake is functioning properly before you hit the open road. -
Step 3: Park your car.
-
Step 4: Wait until your engine has cooled completely before doing anything.
-
Step 5: Unplug the car battery.
-
Step 6: Locate the air intake.
-
Step 7: Remove the air intake system.
-
Step 8: Keep your original air intake.
-
Step 9: Install the new intake.
-
Step 10: Check to make sure the intake system is secured properly.
-
Step 11: Re-attach your battery terminals.
-
Step 12: Test drive your new intake!
Detailed Guide
If you own a commonly customized car, such as a Honda Civic or a Volkswagen Jetta, you will likely need only your model, year, and engine type.
If your car is less commonly modified, it may be harder to find aftermarket parts.
Short-pipe intakes are the simplest design to install, but offer the least benefits in terms of horsepower, torque, and gas mileage.
They pull hot air directly from within the engine compartment into the engine.
Cold air intakes pull cool air from places outside the engine compartment such as around the wheel well or bumper.
These are a bit more complicated to install since you may have to install part of the intake from underneath the car.
The cooler air is denser than the air inside the engine compartment so it gives a better boost to performance and gas mileage than short-pipe designs.
Ram-air intakes usually pull cool air from the bumper area.
Because they are designed to be at the front of the car, they actually pressurize the cool air coming into the engine as the car moves faster.
This provides maximum airflow and maximum benefits.
It is also the most complicated to install since you will likely have to install part of the system from underneath the car.
You may even have to remove your bumper., You should choose an area that has plenty of space for you to move around the front and sides of your vehicle.
You also want a well-lit area so that you can see what you are doing.
Be sure to turn your vehicle off before proceeding. , Parts in the engine compartment can get very hot when the car is running.You do not want to get burned. , Start by removing the negative terminal (black or unmarked) and then remove the positive terminal (red). , This should be easy to identify.
It will look like a large plastic tube running from the engine to a large plastic filter box. , This consists of removing the air filter, the filter box, and the tube running from the filter box to the opening in the engine bay.
Some of these parts will be attached to the engine bay by small plastic mounts.
You will need a wrench or socket set to remove the small bolt holding the mounts in place.
Some pieces of the intake system are fastened to each other with hose clamps, which can be loosened by turning the small bolt on the end with a screwdriver or socket.
You may need to remove one or more air sensors which feed information to the car's computer.
These should be handled very delicately. , If the new intake you purchased is damaged or doesn’t fit, you will have to re-install the original intake system before driving your car.
Set the intake aside until you know the new one works properly. , You should follow the specific manufacturer’s instructions as to which piece to install first.
Be sure to secure the intake with hose clamps where appropriate.
Carefully re-install any sensors removed with the old intake.
Once the new intake is installed, install a new air filter.
Remember that if you purchased a cold air or ram air intake, you will likely need to climb under the car to complete the installation as these systems pull cool air from outside the engine compartment. , If the intake easily strikes other objects in the engine bay, tighten the mountings until it is secure. , You should attach the red (positive) terminal first.
Next, attach the black (negative/ground) terminal. , You want to make sure that the intake is functioning properly before you hit the open road.
About the Author
Edward Kelly
Dedicated to helping readers learn new skills in pet care and beyond.
Rate This Guide
How helpful was this guide? Click to rate: