How to Install Car Mods in Grand Theft Auto San Andreas

Step-by-Step Guide

1. 1

   Step 1: Download the San Andreas Mod Installer (SAMI) installation files.

   SAMI allows you to install just about any GTA San Andreas mod, including new cars, with just a few clicks.You can download the installer from gtainside.com/en/sanandreas/tools/5604-san-andreas-mod-installer/.
   
   Click the Download button to download the RAR file containing the installer.
2. 2

   Step 2: Extract the SAMI RAR file.

   You'll need a program like WinRAR or 7-Zip to extract the files from the RAR file you downloaded. 7-Zip is the most popular free option, and you can download it from 7-zip.org.
   
   After installing 7-Zip, right-click on the RAR file and select "7-Zip" → "Extract Files..." This will extract the files into a new folder in your current directory. , Run the San Andreas Mod Installer v1.0.exe file and confirm that you want to run it.
   
   You can leave the installation settings at their defaults.
   
   After installation, you'll see a San Andreas Mod Installer shortcut on your desktop. , This is required for SAMI to run.
   
   You can download the installer from {{{1}}}.
   
   Run the "dotnetfx" program after downloading and follow the prompts to install it. , Now that you have your mod installer ready to go, you can download a car mod.
   
   Car mods will download in ZIP or RAR format, which you don't need to worry about extracting.
   
   There are several places you can download car mods from, including: gtainside.com nexusmods.com/gtasanandreas gtaall.com gta-modding.com , Once you have a car mod or two downloaded, launch SAMI to add them to San Andreas.
   
   You can find a shortcut for SAMI on your desktop. , This will open a new screen. , This will scan your system for your GTA SA game directory so that you don't need to add it manually.
   
   If the game directory cannot be detected, use the "Browse" button to navigate your computer and select it. , This will tell SAMI to load the mod you select directly from the archive file. , This will open a file browser. , You'll usually find this in your Downloads folder, though you may have moved it elsewhere. , You'll be shown the lines of code that will be changed, which you can just proceed past. , You can use the name of the mod, or enter any name you'd like to use for the car. , Vehicle mods have to be assigned to an existing vehicle slot in the game.
   
   Make sure you select the same type of vehicle (for example, you can't replace a boat with a car). , The mod you install will replace all instances of the selected vehicle in your game. , After installing your car mod, you can load up San Andreas and find it in your game.
   
   The mod replaces all instances of the original vehicle with the mod, so you can narrow down your search if the vehicle normally appears in certain areas.
   
   You can use a car spawner mod to instantly spawn whichever vehicle you'd like.
   
   See the next section for details. , Visit cleo.li/ and download the GTA San Andreas version.
   
   If you add a lot of different cars to your game, you can make things easier by installing a car spawner.
   
   This will allow you to instantly call up any vehicle that you want to use. , You'll need to indicate where GTA SA is installed during the CLEA installation. , You can get one of the most popular ones at zazmahall.de/ZAZGTASANATORIUM/zazmoddat00100/VehicleSpawnerPremium.htm.
   
   After downloading it, double-click the file to view its contents. , You'll find this in your base GTA SA installation folder. , Drag the CS file from the spawner download into this folder, and then the TXT file that was included into the "cleo_text" folder.
   
   This will install the vehicle spawner mod. , This will open the Vehicle Spawner menu, allowing you to select the car you want to spawn.
   
   You'll need to select whichever car you replaced with the car mod in order to load your new mod.
   
   For example, if you replaced the Cheetah with an Audi, you'll need to select the Cheetah from the menu.
3. 3

   Step 3: Install SAMI.

4. 4

   Step 4: Download and install the Microsoft .NET Framework.

5. 5

   Step 5: Download the car you want to add to GTA SA.

6. 6

   Step 6: Start SAMI.

7. 7

   Step 7: Click "Install a Mod."

8. 8

   Step 8: Click "Detect" underneath the San Andreas Directory field.

9. 9

   Step 9: Ensure "ZIP\RAR File" is selected.

10. 10

    Step 10: Click the "Browse" button in the "Mod Location" section.

11. 11

    Step 11: Select the car mod ZIP or RAR file you downloaded.

12. 12

    Step 12: Click "Continue" and then "Continue."

13. 13

    Step 13: Enter a custom name for the vehicle.

14. 14

    Step 14: Select the vehicle that you'll be replacing.

15. 15

    Step 15: Click "Install" to install the mod.

16. 16

    Step 16: Start San Andreas and find your new car.

17. 17

    Step 17: Download CLEO for GTA SA.

18. 18

    Step 18: Run the CLEO installer.

19. 19

    Step 19: Download a Vehicle Spawner CLEO script.

20. 20

    Step 20: Open the "cleo" folder that's been added to your GTA installation directory.

21. 21

    Step 21: Copy the vehicle spawner files.

22. 22

    Step 22: Start San Andreas and press .7.

Detailed Guide

About the Author