How to Make a Breyer Barn out of Wood

Step-by-Step Guide

1. 1

   Step 1: Get some good wood.

   You need enough wood to cover the entire surface area of every wall including the floor(and roof if desired).
   
   Get sheets of wood. , If you don't, get an adult to saw it into the most desirable size needed., Also the length and width(this is going to be the floor)., Measure carefully and evenly so both sides end up the same size and height.
   
   It should be long enough so that it equals the perimeter of the sheet of wood for the flooring., There until you come to the measure of the floor sheet of wood and make a mark., Repeat for each piece of wood., Do the same for all the sides around., You now have a great barn for all your Breyer stablemates!,
2. 2

   Step 2: Its best if you have a sheet of wood the size you want for your barn.

3. 3

   Step 3: Measure how big your sheet of wood is on the sides.

4. 4

   Step 4: Take another long piece of wood for your walls.

5. 5

   Step 5: Measure the long piece of wood.

6. 6

   Step 6: Get an adult to saw at the mark and put it against the wood piece to see if its the right size.

7. 7

   Step 7: Get an adult to lean the piece of wood and the long wood against something and nail it in.

8. 8

   Step 8: Saw a small piece of wood for a room wall do the same until how much rooms you want .

9. 9

   Step 9: You may want to paint too!

Detailed Guide

About the Author