How to Make a Watermelon Smoothie Using a Drill

Step-by-Step Guide

1. 1

   Step 1: Place your watermelon on a large table.

   By using the knife, make a hole in the middle of the watermelon.
2. 2

   Step 2: Remove any parts from the hanger to have just the wire.

   Twist your metal coat hanger in a shape of a long water drop by using pliers or hands. ,,, Now, place the drill's head (coat hanger) inside of the watermelon while spinning it around so the drill could blend the watermelon. , That cup will be the pourer.
   
   It should look like this: ,,,,, Garnish the glass with some fruits or a watermelon, lemon etc. slice, wheel, wedge etc. ,
3. 3

   Step 3: Place the coat hanger in the drill so it could fit properly.

4. 4

   Step 4: See if it works - it shouldn't jam.

5. 5

   Step 5: Turn the drill on.

6. 6

   Step 6: Take your plastic cup and cut it into the shape of the watermelon's mouth or alternatively

7. 7

   Step 7: just cut it in half length-ways.

8. 8

   Step 8: By using the knife

9. 9

   Step 9: cut the hole into a larger semi-circle that's up-side down.

10. 10

    Step 10: See if the pourer (cup) fits.

11. 11

    Step 11: By using the Sharpie draw a face on the watermelon if desired where the hole is the mouth so when you pour the smoothie out

12. 12

    Step 12: the opening will look like a tongue with the help from the pourer.

13. 13

    Step 13: Cut the bottom of the watermelon if desired enough so the watermelon could stand

14. 14

    Step 14: not roll.

15. 15

    Step 15: Pour the watermelon in a glass carefully.

16. 16

    Step 16: Serve and enjoy your refreshing drink!

Detailed Guide

About the Author