How to Make a Window Screen Cleaner
Get hold of some carpet remnants., Look for some remnant blocks of wood., Cut the carpet remnants to fit the blocks of wood. , Glue the carpet remnants to the blocks of wood. , Allow to dry., Use., Rinse after use and allow to dry.
Step-by-Step Guide
-
Step 1: Get hold of some carpet remnants.
If you don't have any remnants lying about the home, ask a local carpet retailer for some. -
Step 2: Look for some remnant blocks of wood.
Again, if you don't have any at home, ask for unwanted offcuts from the local hardware store.
The blocks must be of a size that you can hold comfortably
- probably about the size of a kitchen sponge. ,,, Follow the drying time instructions on the glue. , When it comes to cleaning the window screens. run the carpeted side of the block up and down the screen to remove all the gunk.
You can dampen it if this helps remove the stuck-on dirt etc. , -
Step 3: Cut the carpet remnants to fit the blocks of wood.
-
Step 4: Glue the carpet remnants to the blocks of wood.
-
Step 5: Allow to dry.
-
Step 6: Rinse after use and allow to dry.
Detailed Guide
If you don't have any remnants lying about the home, ask a local carpet retailer for some.
Again, if you don't have any at home, ask for unwanted offcuts from the local hardware store.
The blocks must be of a size that you can hold comfortably
- probably about the size of a kitchen sponge. ,,, Follow the drying time instructions on the glue. , When it comes to cleaning the window screens. run the carpeted side of the block up and down the screen to remove all the gunk.
You can dampen it if this helps remove the stuck-on dirt etc. ,
About the Author
Samantha Lewis
Creates helpful guides on DIY projects to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: