How to Refinish a Front Door

Step-by-Step Guide

1. 1

   Step 1: Remove door from hinges and place on a flat surface.

   This may require a Teflon brush in the profiles of the door. ,, In most cases, 120 grit works great.
   
   You will need to hand sand the profile edges.
   
   Keep going until you achieve a clean and smooth surface. , Apply liberally and give the wood what it wants. ,, Find the varnish with the highest UV protection.
   
   This is key to a lasting finish.
   
   Use a minimum of two applications.
2. 2

   Step 2: Tape and seal any exposed glass and remove all hardware.

3. 3

   Step 3: Apply paint stripper generously to the entire surface.

4. 4

   Step 4: Go back and apply paint stripper in small areas until you see it bubble off its surface.

5. 5

   Step 5: Take the bubbled section and scrape it off with putty knife and discard.

6. 6

   Step 6: Take a coarse sponge and clean the door with lacquer thinner.

7. 7

   Step 7: Sand the entire door with an orbital sander.

8. 8

   Step 8: Apply the color of stain that you want.

9. 9

   Step 9: Wipe any excess stain off.

10. 10

    Step 10: Spray a generous

11. 11

    Step 11: yet smooth coat of exterior varnish.

Detailed Guide

About the Author