How to Test Pinging Services with Xmlrpc‐Test
Go to the online xmlrpc-test-tool., In "XMLRPC-Server" field enter the service URL to be tested. , In "custom method" field enter "weblogUpdates.ping"., Click on "send"., Look at the "response" area.
Step-by-Step Guide
-
Step 1: Go to the online xmlrpc-test-tool.
It is case sensitive, so write it exactly as shown. , In the output region you'll see the response. , If you see "Missing weblog URL" in the response, then the pinging service is alive.
It means that the command is understood but the required parameters are missing.
For our purpose this response is enough.
For any other response or no response at all, the tested service is not alive. -
Step 2: In "XMLRPC-Server" field enter the service URL to be tested.
-
Step 3: In "custom method" field enter "weblogUpdates.ping".
-
Step 4: Click on "send".
-
Step 5: Look at the "response" area.
Detailed Guide
It is case sensitive, so write it exactly as shown. , In the output region you'll see the response. , If you see "Missing weblog URL" in the response, then the pinging service is alive.
It means that the command is understood but the required parameters are missing.
For our purpose this response is enough.
For any other response or no response at all, the tested service is not alive.
About the Author
Dennis Moore
Dennis Moore has dedicated 11 years to mastering educational content. As a content creator, Dennis focuses on providing actionable tips and step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: