How to Bull Your Parade Boots/Shoes

Step-by-Step Guide

1. 1

   Step 1: Gather your supplies and find a good area to get to work.

   You will need some water, and a cloth (anything you can use to remove any dirt off of your boots without damaging the leather).
2. 2

   Step 2: Clean your boots first.

   Use a brand new polishing cloth to dry and clean all dust off of the boots. , After the boots are cleaned you need a good polish which is the exact same colour as the leather, and another polishing cloth, as well as a polish remover brush. ,, You may wish to do your other boot while the polish is drying. , Your aim is not to remove the polish but to give a lovely shine.
   
   Only brush in one direction. ,, Use a tiny amount of water in circular motions on the toe of your boot using one finger. , Place on the toe of the boot and move quickly from side to side. , If the shine is not what desired repeat the polishing part of the process until desired shine is achieved.
3. 3

   Step 3: Prepare to polish.

4. 4

   Step 4: Use the polishing cloth with one finger to apply a very thin layer of polish onto the boot.

5. 5

   Step 5: Leave the polish to dry on the boot.

6. 6

   Step 6: Once the polish is dry

7. 7

   Step 7: use the remover brush to gently brush over the polish.

8. 8

   Step 8: Find a sponge and use the same motion you used with the brush on the sponge.

9. 9

   Step 9: Get another good quality polishing cloth or chamois cloth.

10. 10

    Step 10: Get hold of two opposite corners of the cloth.

11. 11

    Step 11: Keep going as needed.

Detailed Guide

About the Author