How to Make a Batman Utility Belt
Get the materials needed., Draw or trace a pattern onto the foam., Cut out the patterns., Glue the pieces together., Get the materials needed., Create a pattern., Trace and cut out the pieces., Glue the pieces together to form pouches., Glue velcro...
Step-by-Step Guide
-
Step 1: Get the materials needed.
To make the buckle, you'll need 3mm foam, scissors, a X-Acto knife, and super glue.
Use 3mm foam.
Use yellow foam for an all yellow utility belt, and black foam for an all black belt.
Alternatively, you can use both black and yellow foam, using yellow for the base of the buckle and black for the Batman symbol. -
Step 2: Draw or trace a pattern onto the foam.
For the design of the Batman buckle, you can make your own, using a picture of Batman's utility belt as a reference, or you can use a pattern, such as the one found here: http://www.thefoamcave.com/tutorials/how-to-make-a-utility-belt.
Use a sharpie or a pen to draw the patterns in the foam.
For a basic Batman utility belt buckle, you'll need three pieces: an oval, a ring that goes around the edge of the oval, and a Batman symbol.
The oval should be roughly 4" across and 3" tall.
The ring should be the same dimensions of the oval but with the middle cut out.
The Batman symbol should be no bigger than the inner dimensions of the ring. , After you've drawn the three pieces on the foam, the oval, the ring, and the Batman symbol, and whatever other details you chose, cut them out.
You can use scissors for the bigger pieces, like the base oval.
For pieces with smaller details, like the Batman symbol, use an X-Acto knife. , Glue the ring onto the edges of the oval to create a border.
Glue the Batman symbol onto the center of the oval.
Allow the glue to dry., To make the pouches, you'll need 5mm foam, scissors, a X-Acto knife, cardboard or cardstock, a ruler, velcro, and super glue.
Use yellow foam if you want a yellow Batman utility belt, and black foam for an all black belt. , A basic pouch is made out of three foam pieces.
The first piece is a long rectangle that is folded to form the front, back, and top flap.
The other two pieces are shorter and narrower rectangles that function as the sides.
To create the first piece, make a pattern piece out of cardboard or cardstock that is
10.5 inches long and 4 inches wide.
To create the two side pieces, make 2 pattern pieces out of cardboard or cardstock that are 3 ⅜ inches long and ⅞ inches wide.
Cut out the pattern pieces.
The pouches on your utility belt may be any size you wish.
Allow the items you intend to carry determine the size of the pouches—the pouch must be large enough to hold the item.
To create a custom-sized pouch, use the length, width, and depth measurements of the items you plan to carry in the pouches of your utility belt. , Trace each pattern piece onto the foam 4 to 6 times.
Use scissors to cut out all the pieces.
If you have more room on your belt, you can always make more pouches.
You may need to round the edges of the side pieces with scissors so that they fit. , Prior to construction the pouches, you must determine the flap length.
And add one inch to this measurement to account for the width of the pouch.
Measure and mark the flap.
From the top of the rectangle, use a ruler to measure and mark the length of your flap.
Place side pieces.
Place a thin layer of glue along one long edge of a side piece—this edge will rest on the top of the large rectangle.
Align the top of the side with the mark used to indicate the flap length and align the edge with glue flush with large rectangle’s left edge.
Repeat this process with the other side piece, attaching it to the right edge of the large rectangle.
Allow the glue to dry.
Place a thin layer of glue along each of the side piece’s bottom and side edge.
Do not put glue on the top edge.
Fold the large rectangle up and over the base and side edges of the two side pieces.
Hold the large rectangle in place as the glue sets.
Repeat this process until you have constructed each pouch. , To prevent your pouches from opening, add a piece of velcro to the flap of each pouch.
Cut one small square of velcro for each pouch.
Do not pull apart the velcro.
Glue one side of the velcro onto the inside of the front flap.
Place a small amount of glue onto the other side of the velcro.
Carefully fold the flap onto the front of the pouch and hold it firmly in place.
Once the glue has dried, rip apart the velcro., If you want to add canisters, you can use a number of different objects.
You can use film roll canisters, or pill bottles, or some other cylindrical object that would fit on a belt., You'll want a thick leather belt to attach everything to.
If you think you'll want to paint the whole thing yellow, it doesn't matter what color the belt is.
If you want your Batman utility belt to be all black or have yellow pouches on a black belt, look for a black leather belt., You'll want to use super glue of some sort to glue everything to the belt.
Krazy glue will work.
Don't paint anything until it's all glued on, as glue doesn't stick to painted surfaces as well., Use acrylic paint to paint what you want to be a different color.
This will usually include painting the canisters yellow and optionally painting the belt yellow.
Use a small brush to get the edges where the belt meets the pouches so that there's no brown or black leather showing, if you want the belt yellow., -
Step 3: Cut out the patterns.
-
Step 4: Glue the pieces together.
-
Step 5: Get the materials needed.
-
Step 6: Create a pattern.
-
Step 7: Trace and cut out the pieces.
-
Step 8: Glue the pieces together to form pouches.
-
Step 9: Glue velcro to the flap.
-
Step 10: Use found objects for canisters.
-
Step 11: Get a belt.
-
Step 12: Glue the pouches
-
Step 13: buckle
-
Step 14: and optional canisters to the belt.
-
Step 15: Paint the belt.
-
Step 16: Finished.
Detailed Guide
To make the buckle, you'll need 3mm foam, scissors, a X-Acto knife, and super glue.
Use 3mm foam.
Use yellow foam for an all yellow utility belt, and black foam for an all black belt.
Alternatively, you can use both black and yellow foam, using yellow for the base of the buckle and black for the Batman symbol.
For the design of the Batman buckle, you can make your own, using a picture of Batman's utility belt as a reference, or you can use a pattern, such as the one found here: http://www.thefoamcave.com/tutorials/how-to-make-a-utility-belt.
Use a sharpie or a pen to draw the patterns in the foam.
For a basic Batman utility belt buckle, you'll need three pieces: an oval, a ring that goes around the edge of the oval, and a Batman symbol.
The oval should be roughly 4" across and 3" tall.
The ring should be the same dimensions of the oval but with the middle cut out.
The Batman symbol should be no bigger than the inner dimensions of the ring. , After you've drawn the three pieces on the foam, the oval, the ring, and the Batman symbol, and whatever other details you chose, cut them out.
You can use scissors for the bigger pieces, like the base oval.
For pieces with smaller details, like the Batman symbol, use an X-Acto knife. , Glue the ring onto the edges of the oval to create a border.
Glue the Batman symbol onto the center of the oval.
Allow the glue to dry., To make the pouches, you'll need 5mm foam, scissors, a X-Acto knife, cardboard or cardstock, a ruler, velcro, and super glue.
Use yellow foam if you want a yellow Batman utility belt, and black foam for an all black belt. , A basic pouch is made out of three foam pieces.
The first piece is a long rectangle that is folded to form the front, back, and top flap.
The other two pieces are shorter and narrower rectangles that function as the sides.
To create the first piece, make a pattern piece out of cardboard or cardstock that is
10.5 inches long and 4 inches wide.
To create the two side pieces, make 2 pattern pieces out of cardboard or cardstock that are 3 ⅜ inches long and ⅞ inches wide.
Cut out the pattern pieces.
The pouches on your utility belt may be any size you wish.
Allow the items you intend to carry determine the size of the pouches—the pouch must be large enough to hold the item.
To create a custom-sized pouch, use the length, width, and depth measurements of the items you plan to carry in the pouches of your utility belt. , Trace each pattern piece onto the foam 4 to 6 times.
Use scissors to cut out all the pieces.
If you have more room on your belt, you can always make more pouches.
You may need to round the edges of the side pieces with scissors so that they fit. , Prior to construction the pouches, you must determine the flap length.
And add one inch to this measurement to account for the width of the pouch.
Measure and mark the flap.
From the top of the rectangle, use a ruler to measure and mark the length of your flap.
Place side pieces.
Place a thin layer of glue along one long edge of a side piece—this edge will rest on the top of the large rectangle.
Align the top of the side with the mark used to indicate the flap length and align the edge with glue flush with large rectangle’s left edge.
Repeat this process with the other side piece, attaching it to the right edge of the large rectangle.
Allow the glue to dry.
Place a thin layer of glue along each of the side piece’s bottom and side edge.
Do not put glue on the top edge.
Fold the large rectangle up and over the base and side edges of the two side pieces.
Hold the large rectangle in place as the glue sets.
Repeat this process until you have constructed each pouch. , To prevent your pouches from opening, add a piece of velcro to the flap of each pouch.
Cut one small square of velcro for each pouch.
Do not pull apart the velcro.
Glue one side of the velcro onto the inside of the front flap.
Place a small amount of glue onto the other side of the velcro.
Carefully fold the flap onto the front of the pouch and hold it firmly in place.
Once the glue has dried, rip apart the velcro., If you want to add canisters, you can use a number of different objects.
You can use film roll canisters, or pill bottles, or some other cylindrical object that would fit on a belt., You'll want a thick leather belt to attach everything to.
If you think you'll want to paint the whole thing yellow, it doesn't matter what color the belt is.
If you want your Batman utility belt to be all black or have yellow pouches on a black belt, look for a black leather belt., You'll want to use super glue of some sort to glue everything to the belt.
Krazy glue will work.
Don't paint anything until it's all glued on, as glue doesn't stick to painted surfaces as well., Use acrylic paint to paint what you want to be a different color.
This will usually include painting the canisters yellow and optionally painting the belt yellow.
Use a small brush to get the edges where the belt meets the pouches so that there's no brown or black leather showing, if you want the belt yellow.,
About the Author
Christine Harris
Brings years of experience writing about pet care and related subjects.
Rate This Guide
How helpful was this guide? Click to rate: