How to Measure for a Suit
Measure your total height and weight., Wear a dress shirt when measuring for a suit., Measure your over-arm shoulder width., Measure your chest., Measure your arms., Measure your neck., Always wear shoes when measuring for pants., Measure your...
Step-by-Step Guide
-
Step 1: Measure your total height and weight.
Anytime you're buying a suit, whatever the style and the size, it's a good idea to take a recent measurement of your height and weight to provide.
While the individual measurements associated with the suit are also important to get the right fit, basic height and weight are good ways to get in the ballpark.
This is especially important if you're going to have your suit tailored, because height and weight helps tailors determine your “drop” of the suit, which is the difference between the size of the pants and jacket.
It'll help the suit be tailored more quickly. -
Step 2: Wear a dress shirt when measuring for a suit.
It's important to be wearing the type of shirt you might be wearing under a suit while you're taking measurements for a suit.
The shoulder seam in the shirt can serve as a vantage point when measuring the width of your shoulders or your arm length, and the bulk of the shirt will help ensure that your jacket isn't too snug. , The over-arm measurement will help to create the width of the entire jacket, from shoulder-to-shoulder.
Start your tape measure at the back corner of one shoulder, just below where you clavicle ends.
Run it across the top of your shoulders, behind your neck and to the back corner of the other shoulder.
When determining measurements, don't pull the tape measure tight.
Instead, make sure it fits snugly around the body part(s) you're measuring.
Pulling the tape measure too tight will result in a suit that is too tight. , The chest is an essential measurement to get the right body-fit and flattering cut for the jacket.
To take it, raise both arms and run the tape measure around the fullest part of your chest, underneath both your arms.
Lower your arms to record the measurement once the tape measure is in place.
Don't flex your chest muscles when figuring out your chest measurement.
Flexing your muscles could result in over inflated chest measurements and your suit will not fit well. , Start your tape measure from the same point on your shoulder where you measured your shoulder width.
Slide your tape measure down your arm to your wrist.
You also may need to provide your coat in-sleeve measurement, while wearing a jacket.
Put the tape measure on the inside of your arm, slightly below your wrist.
Pull the tape up into your underarm for the complete measurement. , If you're going to also buy or rent a dress shirt, it's also important to take a neck measurement.
Wrap the tape measure around the bottom of your neck, just above your collar bone, where your collar would be normally.
This will help you find a shirt that fits properly. , Because dress shoes change the way you stand slightly, as well as giving you a little extra added height, it's important to wear dress shoes, the type of which you may wear with the suit, while you're measuring for the pants, to help you take accurate measurements. , To get the right waist size of the pants, measure the widest part of your hip bones.
Wrap the tape measure all the way around the points of your hips, generally where your pants normally sit.
Measure your waist as well.
Depending on the style of the pants, you may or may not need to take your waist measurement, so it's a good idea to bring it along to the store anyway.
Find a starting point slightly above either hip bone along your waistline.
Loop the tape measure around your waist and back to your starting point to help get an accurate measurement for the waist of the suit pants. , The outseam is the measurement of the outer-most leg of your pants, trailing down from your hip to your ankle.
To take the measurement, stand with your back as straight as possible and measure from your belt-line to the side of your foot in shoes. , While wearing appropriate shoes, begin the measurement at the top, inside part of your leg where your leg meets your groin.
Run the tape measure down the inside of the leg to a point near the middle of your foot.
It's also possible to take this measurement on a pair of pants that you already have that fit you well.
Lay the pants out on a flat surface, hip side down.
Fold one pant leg out of the way and measure down the entire length of the inseam. , Suits are typically described with a particular number that describes the size and a word describing the length.
A 44 extra-long, for example, would be a relatively large jacket.
The size of the jacket refers to the body-fit and the style, based on your chest measurements and your over-arm measurements.
The most common jacket sizes for adults include: 38 jackets are for people with a 40 in. chest, 18 in. shoulder, and
24.5 in. sleeves. 40 jackets are for people with a 42 in. chest,
18.5 in. shoulder, and 25 in. sleeves. 42 jackets are for people with a 44 in. chest, 19 in. shoulder, and
25.5 in. sleeves. 44 jackets are for people with a 46 in. chest, 19 in. shoulder, and 26 in. sleeves. , Coat length is based on height, so you should be able to know what size coat you’ll need if you know size of the dress shirts you get and your height.
A short is typically used on people under 5’7, with sleeves up to 32 in.
A regular is for people between 5’8 and 5’11, with sleeves of 32-33 in.
A long is for people between 6’0 and 6’2, with sleeves of 34-36 in.
An extra-long is for people taller than 6’2 with sleeves longer than 36 in. , When you try a jacket on, the armholes should be loose enough to allow you comfortable and full range of motion.
In a new suit, you don't want to risk ripping the interior lining of the jacket because it's too snug.
Suit jackets are easily to tailor, and it's recommended that you get your jacket tailored if it feels snug.
If you feel a pinch in your arm-pit, have the jacket taken out. , Coats shouldn't look bunched up across your back shoulders, but should fall and create a smooth surface across, making clean lines that flatter your build.
If you find bunching, you may have a jacket that's too small, poorly stitched, or just the wrong size. , Let your arms hang loosely at your sides to check and make sure the sleeves are of the appropriate length.
The sleeve hem should hang down your your knuckles, and reveal about a 1⁄2 inch (1.3 cm) of the shirt cuff when your arms are extended out in front of you. , Trousers should be hemmed evenly with the heel of your shoe, gently breaking on the top of the shoe.
They shouldn't drape too much or bunch, and should hang over the shoes gently. -
Step 3: Measure your over-arm shoulder width.
-
Step 4: Measure your chest.
-
Step 5: Measure your arms.
-
Step 6: Measure your neck.
-
Step 7: Always wear shoes when measuring for pants.
-
Step 8: Measure your hips.
-
Step 9: Measure your outseam.
-
Step 10: Measure your inseam.
-
Step 11: Learn how jackets are sized.
-
Step 12: Learn how coat length is determined.
-
Step 13: Make sure the armholes aren’t snug.
-
Step 14: Make sure the coat is smooth across your back.
-
Step 15: Make sure the sleeves are the appropriate length.
-
Step 16: Make sure the pants are the correct length.
Detailed Guide
Anytime you're buying a suit, whatever the style and the size, it's a good idea to take a recent measurement of your height and weight to provide.
While the individual measurements associated with the suit are also important to get the right fit, basic height and weight are good ways to get in the ballpark.
This is especially important if you're going to have your suit tailored, because height and weight helps tailors determine your “drop” of the suit, which is the difference between the size of the pants and jacket.
It'll help the suit be tailored more quickly.
It's important to be wearing the type of shirt you might be wearing under a suit while you're taking measurements for a suit.
The shoulder seam in the shirt can serve as a vantage point when measuring the width of your shoulders or your arm length, and the bulk of the shirt will help ensure that your jacket isn't too snug. , The over-arm measurement will help to create the width of the entire jacket, from shoulder-to-shoulder.
Start your tape measure at the back corner of one shoulder, just below where you clavicle ends.
Run it across the top of your shoulders, behind your neck and to the back corner of the other shoulder.
When determining measurements, don't pull the tape measure tight.
Instead, make sure it fits snugly around the body part(s) you're measuring.
Pulling the tape measure too tight will result in a suit that is too tight. , The chest is an essential measurement to get the right body-fit and flattering cut for the jacket.
To take it, raise both arms and run the tape measure around the fullest part of your chest, underneath both your arms.
Lower your arms to record the measurement once the tape measure is in place.
Don't flex your chest muscles when figuring out your chest measurement.
Flexing your muscles could result in over inflated chest measurements and your suit will not fit well. , Start your tape measure from the same point on your shoulder where you measured your shoulder width.
Slide your tape measure down your arm to your wrist.
You also may need to provide your coat in-sleeve measurement, while wearing a jacket.
Put the tape measure on the inside of your arm, slightly below your wrist.
Pull the tape up into your underarm for the complete measurement. , If you're going to also buy or rent a dress shirt, it's also important to take a neck measurement.
Wrap the tape measure around the bottom of your neck, just above your collar bone, where your collar would be normally.
This will help you find a shirt that fits properly. , Because dress shoes change the way you stand slightly, as well as giving you a little extra added height, it's important to wear dress shoes, the type of which you may wear with the suit, while you're measuring for the pants, to help you take accurate measurements. , To get the right waist size of the pants, measure the widest part of your hip bones.
Wrap the tape measure all the way around the points of your hips, generally where your pants normally sit.
Measure your waist as well.
Depending on the style of the pants, you may or may not need to take your waist measurement, so it's a good idea to bring it along to the store anyway.
Find a starting point slightly above either hip bone along your waistline.
Loop the tape measure around your waist and back to your starting point to help get an accurate measurement for the waist of the suit pants. , The outseam is the measurement of the outer-most leg of your pants, trailing down from your hip to your ankle.
To take the measurement, stand with your back as straight as possible and measure from your belt-line to the side of your foot in shoes. , While wearing appropriate shoes, begin the measurement at the top, inside part of your leg where your leg meets your groin.
Run the tape measure down the inside of the leg to a point near the middle of your foot.
It's also possible to take this measurement on a pair of pants that you already have that fit you well.
Lay the pants out on a flat surface, hip side down.
Fold one pant leg out of the way and measure down the entire length of the inseam. , Suits are typically described with a particular number that describes the size and a word describing the length.
A 44 extra-long, for example, would be a relatively large jacket.
The size of the jacket refers to the body-fit and the style, based on your chest measurements and your over-arm measurements.
The most common jacket sizes for adults include: 38 jackets are for people with a 40 in. chest, 18 in. shoulder, and
24.5 in. sleeves. 40 jackets are for people with a 42 in. chest,
18.5 in. shoulder, and 25 in. sleeves. 42 jackets are for people with a 44 in. chest, 19 in. shoulder, and
25.5 in. sleeves. 44 jackets are for people with a 46 in. chest, 19 in. shoulder, and 26 in. sleeves. , Coat length is based on height, so you should be able to know what size coat you’ll need if you know size of the dress shirts you get and your height.
A short is typically used on people under 5’7, with sleeves up to 32 in.
A regular is for people between 5’8 and 5’11, with sleeves of 32-33 in.
A long is for people between 6’0 and 6’2, with sleeves of 34-36 in.
An extra-long is for people taller than 6’2 with sleeves longer than 36 in. , When you try a jacket on, the armholes should be loose enough to allow you comfortable and full range of motion.
In a new suit, you don't want to risk ripping the interior lining of the jacket because it's too snug.
Suit jackets are easily to tailor, and it's recommended that you get your jacket tailored if it feels snug.
If you feel a pinch in your arm-pit, have the jacket taken out. , Coats shouldn't look bunched up across your back shoulders, but should fall and create a smooth surface across, making clean lines that flatter your build.
If you find bunching, you may have a jacket that's too small, poorly stitched, or just the wrong size. , Let your arms hang loosely at your sides to check and make sure the sleeves are of the appropriate length.
The sleeve hem should hang down your your knuckles, and reveal about a 1⁄2 inch (1.3 cm) of the shirt cuff when your arms are extended out in front of you. , Trousers should be hemmed evenly with the heel of your shoe, gently breaking on the top of the shoe.
They shouldn't drape too much or bunch, and should hang over the shoes gently.
About the Author
Janet Diaz
Enthusiastic about teaching pet care techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: