How to Make a "Money Making" Trick Device

Step-by-Step Guide

1. 1

   Step 1: Get some black paper.

   You may use black construction paper, or, if you have a printer, you may print black paper (both sides).
   
   If you have an all-in-one printer, keep the scanner cover open, put nothing inside and select copy.
   
   You will print out a black sheet of paper.
   
   Make sure to print the other side as well. , You will need two strips (based on A4 size paper).
   
   If you have a paper cutter, a paper cutter will make this easier.
   
   Otherwise, use scissors and a ruler., Make sure you are using clear tape.,, Leave a small amount of paper unrolled, preferably 2in unrolled., Once done, the 2 rolls should be connected and look like the one in the image., Use a strip of cardboard, make an arch and place 2 holes on both left and right side for the sticks.
   
   Choose which side of the sticks to use as knobs.
   
   Then, with another piece of cardboard, cut 2 holes the size of the bottom of the arch so they fit snug inside.
   
   If necessary, use glue to hold in place., If built correctly, the dollar bill should be rolled inside.,,
2. 2

   Step 2: Cut the black paper into a strip that is 3.5in thick.

3. 3

   Step 3: Tape the two strips of paper together to get one long strip of paper.

4. 4

   Step 4: Tape the paper to one of the sticks.

5. 5

   Step 5: Roll the black paper to the stick.

6. 6

   Step 6: Roll the remaining part to another stick while rolling in a different direction.

7. 7

   Step 7: Make a cardboard case.

8. 8

   Step 8: Place a dollar bill and turn the knob to roll inside.

9. 9

   Step 9: Place the white sheet of paper in the other side and turn the knob so that the dollar bill will come out.

10. 10

    Step 10: Impress your friends and fans with your trick!

Detailed Guide

About the Author