How to Disassemble an Xbox

Step-by-Step Guide

1. 1

   Step 1: Remove the faceplate.

   Turn the Xbox upside down, place your finger in the hole, and pull forward.
   
   A good tug will be necessary.
2. 2

   Step 2: Remove the lower grill.

   There are six tabs, hidden behind the venting holes on the white side, which hold this piece on.
   
   Using your case opening tool or small screwdriver, pop these tabs one at a time and slowly remove the lower grill.
   
   Start at the front end, where the faceplate is located, as this will have a good place to grasp the grill to lift it as you go. , First, pull off the hard drive if you haven’t already.
   
   You will notice that the grill on this side is not flat.
   
   You will need to pop the two tabs which are located along the ledge first.
   
   Then pop the two tabs which are visible on the sides, much like the lower grill.
   
   The final tab is hidden under one of the rubber feet.
   
   This tab has a seal, which will indicate to Microsoft that you have broken your warranty.
3. 3

   Step 3: Remove the upper grill.

Detailed Guide

About the Author