How to Sync Plantronics Headset
Make sure your headset is charged., Turn your headset on., Enable Pairing mode., Pair your devices.
Step-by-Step Guide
-
Step 1: Make sure your headset is charged.
Depending on your headset model, the power light should be lighting up solidly—meaning it’s lit up but not flashing—when the headset is fully charged.
Depending on the model of your Plantronics headset, you will hear a single tone every 15 seconds if it’s on low battery, or the power indicator will flash. -
Step 2: Turn your headset on.
There are a number of ways to turn on a pair of Plantronics headset, but all require you to switch on the Power button, which is easy to identify.
Either flip, press, or slide the button to the ON position. , The way to enter Pairing mode depends on the headset model.
If your headset has a single multi-function button, start with it off, then press and hold it for 5–6 seconds until the light start flashing.
If your headset has a sliding On and Off switch, hold the call button for 5–6 seconds until the light starts flashing.
For headsets with a On and Off button, start with the headset powered off and hold the Power button down for 5–6 seconds until the light starts flashing. , Once you have set your headset on Pairing mode, go to a music player device that supports Bluetooth and enable Bluetooth on it.
When your device detects the headset, select it and enter 0000 (four zeroes) if prompted for a passkey. -
Step 3: Enable Pairing mode.
-
Step 4: Pair your devices.
Detailed Guide
Depending on your headset model, the power light should be lighting up solidly—meaning it’s lit up but not flashing—when the headset is fully charged.
Depending on the model of your Plantronics headset, you will hear a single tone every 15 seconds if it’s on low battery, or the power indicator will flash.
There are a number of ways to turn on a pair of Plantronics headset, but all require you to switch on the Power button, which is easy to identify.
Either flip, press, or slide the button to the ON position. , The way to enter Pairing mode depends on the headset model.
If your headset has a single multi-function button, start with it off, then press and hold it for 5–6 seconds until the light start flashing.
If your headset has a sliding On and Off switch, hold the call button for 5–6 seconds until the light starts flashing.
For headsets with a On and Off button, start with the headset powered off and hold the Power button down for 5–6 seconds until the light starts flashing. , Once you have set your headset on Pairing mode, go to a music player device that supports Bluetooth and enable Bluetooth on it.
When your device detects the headset, select it and enter 0000 (four zeroes) if prompted for a passkey.
About the Author
Kathryn Gray
Writer and educator with a focus on practical organization knowledge.
Rate This Guide
How helpful was this guide? Click to rate: