How to Caulk Around Ceramic Tiles

Step-by-Step Guide

1. 1

   Step 1: Wipe down the edges of the tiles with a clean cloth.

   Remove any dust, debris or construction materials that may prevent the caulk from forming a good seal around the tiles.
   
   If the tiles or surrounding area is wet, allow it to dry completely.
2. 2

   Step 2: Cut the tip of the caulk tube off at a 45 degree angle.

   Make this cut only as large as the grout joints that surround the tiles; this will provide the right amount of caulk for the space. ,,,, Try to keep the caulk in the center of the joint. , Lightly press down on the caulk and drag your finger along the edges of the ceramic tiles. ,
3. 3

   Step 3: Insert the tip of the caulk tube into the caulking gun.

4. 4

   Step 4: Push in the plunger on the back of the caulking gun and tighten down the gun so minimal pressure will release the caulk.

5. 5

   Step 5: Start at the top right of the installation and work down and to the left.

6. 6

   Step 6: Squeeze a thin bead of caulk in a continuous line around the tiles to be caulked.

7. 7

   Step 7: Wet your index finger and use it to smooth the caulk into place in the joint.

8. 8

   Step 8: Let the caulk dry for 24 hours before using the tiled space again.

Detailed Guide

About the Author