How to Change Washers in the Kitchen Faucet
Gather your tools., Switch off the water supply., Remove decorative parts of the faucet., Take off the faucet's handle., Remove the stem with pliers., Take out the old cartridge with pliers., Bring your old parts to a hardware store, if necessary...
Step-by-Step Guide
-
Step 1: Gather your tools.
This way, you'll be prepared for the process.
To disassemble your faucet, you'll need the following:
A pair of pliers An adjustable wrench A phillips or flathead screwdriver -
Step 2: Switch off the water supply.
You do not want water pumping into the faucet while you're disassembling it.
Under your sink, you should see a couple of valves just behind the pipe.Switch these valves to the off position.
Turn the valves clockwise to do so.
This will prevent water flow while you work.
Turn the hot and cold faucets on to drain the water between the spigot and the shutoff valve. , These are the small caps on top of the faucet.
They may read "hot" or "cold." You can remove them by simply inserting a flathead screwdriver just underneath the caps.
Gently pry the cap off.
It should come off without too much effort.It's a good idea to wrap the screwdriver cap in a cloth prior to removing the cap.
This will prevent you from chipping or denting your faucet. , You should see a small screw just underneath the cap.
This is attached to the washer.
You must loosen it to remove the handle of your faucet.
Use your Phillips head screwdriver to remove the screw.Once the screw is removed, gently wiggle the faucet's handle back and forth.
Eventually, it should come loose.
You can then pull out the handle.
Not all faucets have a handle.
If yours does not, you can skip this step.
However, you should still remove your washer's screw. , The stem, sometimes called the bonnet, is a small circular piece that sits above the washer's valve that looks something like a donut.
Gently clamp your pliers around the bonnet and pull it out of place.Some stems cannot be pulled out with pliers.
If you can easily twist the stem, this means you will need to twist it off instead.
Make sure to place the stem in a safe place.
You will need it later when inserting the new washer. , You now have access to the cylinder shaped washer contained inside your faucet.
Using your pliers, pull the washer out of place.There are o-shaped rings, called O-rings, that suction the washer to the faucet.
You will have to grip your pliers tight and pull with a little force to remove the washer. , If you've never disassembled your faucet before, you may not know what kind of washer you need.
If you don't already have a replacement on hand, take the parts you removed to a hardware store.
Find an exact match for each part.If you're unsure where to look at the hardware store, ask a worker. , Worn out o-rings can cause a faucet to leak as easily as a worn washer can.
If the leak is coming from the base of the faucet, the o-rings are probably worn.
Place a pair of replacement o-rings at the bottom of the faucet before inserting a new washer., You simply slip the washer in place.
From here, you're basically working in reverse order.
The washer should fit the same as the one you removed.Make sure you place the washer in the exact same position as the original one. , Either screw the stem back on, or place it back over the washer.
Then, place the screw you removed back in place using your Phillips head screwdriver.
Make sure you tighten the screw to get the stem secure.If you removed the handle, put it back in place before placing the screw back in place. , This the easiest part of the process.
You simply snap the cap back on.
Now, your faucet should no longer leak.
You can turn the water back on and run your faucet.Once the cap is in place, turn the water valve counter clockwise to switch the faucet back on. , This assures that nothing goes down the drain.
There are a lot of small parts involved when you replace a washer.
They can easily slip out of your hand.If you don't have a plug for your faucet, simply place a wet rag over the drain. , You want to make sure the o-rings fit the washer exactly.
Otherwise, your water will not run properly.
If you are uncertain what type of o-rings you need, take the old o-rings to a department store.
You should be able to find a match there., There are many problems that could cause a leaky faucet.
Worn-out seals, loose parts, or broken plumbing can cause a leak.
These problems will be difficult to correct on your own, so you should contact a professional. -
Step 3: Remove decorative parts of the faucet.
-
Step 4: Take off the faucet's handle.
-
Step 5: Remove the stem with pliers.
-
Step 6: Take out the old cartridge with pliers.
-
Step 7: Bring your old parts to a hardware store
-
Step 8: if necessary.
-
Step 9: Determine if you need to replace the o-rings.
-
Step 10: Insert the new washer.
-
Step 11: Reassemble the stem.
-
Step 12: Put the cap back in place.
-
Step 13: Plug the drain before beginning the process.
-
Step 14: Make sure the replacement washer is an exact fit.
-
Step 15: Call a professional plumber if replacing the washer does not fix a leak.
Detailed Guide
This way, you'll be prepared for the process.
To disassemble your faucet, you'll need the following:
A pair of pliers An adjustable wrench A phillips or flathead screwdriver
You do not want water pumping into the faucet while you're disassembling it.
Under your sink, you should see a couple of valves just behind the pipe.Switch these valves to the off position.
Turn the valves clockwise to do so.
This will prevent water flow while you work.
Turn the hot and cold faucets on to drain the water between the spigot and the shutoff valve. , These are the small caps on top of the faucet.
They may read "hot" or "cold." You can remove them by simply inserting a flathead screwdriver just underneath the caps.
Gently pry the cap off.
It should come off without too much effort.It's a good idea to wrap the screwdriver cap in a cloth prior to removing the cap.
This will prevent you from chipping or denting your faucet. , You should see a small screw just underneath the cap.
This is attached to the washer.
You must loosen it to remove the handle of your faucet.
Use your Phillips head screwdriver to remove the screw.Once the screw is removed, gently wiggle the faucet's handle back and forth.
Eventually, it should come loose.
You can then pull out the handle.
Not all faucets have a handle.
If yours does not, you can skip this step.
However, you should still remove your washer's screw. , The stem, sometimes called the bonnet, is a small circular piece that sits above the washer's valve that looks something like a donut.
Gently clamp your pliers around the bonnet and pull it out of place.Some stems cannot be pulled out with pliers.
If you can easily twist the stem, this means you will need to twist it off instead.
Make sure to place the stem in a safe place.
You will need it later when inserting the new washer. , You now have access to the cylinder shaped washer contained inside your faucet.
Using your pliers, pull the washer out of place.There are o-shaped rings, called O-rings, that suction the washer to the faucet.
You will have to grip your pliers tight and pull with a little force to remove the washer. , If you've never disassembled your faucet before, you may not know what kind of washer you need.
If you don't already have a replacement on hand, take the parts you removed to a hardware store.
Find an exact match for each part.If you're unsure where to look at the hardware store, ask a worker. , Worn out o-rings can cause a faucet to leak as easily as a worn washer can.
If the leak is coming from the base of the faucet, the o-rings are probably worn.
Place a pair of replacement o-rings at the bottom of the faucet before inserting a new washer., You simply slip the washer in place.
From here, you're basically working in reverse order.
The washer should fit the same as the one you removed.Make sure you place the washer in the exact same position as the original one. , Either screw the stem back on, or place it back over the washer.
Then, place the screw you removed back in place using your Phillips head screwdriver.
Make sure you tighten the screw to get the stem secure.If you removed the handle, put it back in place before placing the screw back in place. , This the easiest part of the process.
You simply snap the cap back on.
Now, your faucet should no longer leak.
You can turn the water back on and run your faucet.Once the cap is in place, turn the water valve counter clockwise to switch the faucet back on. , This assures that nothing goes down the drain.
There are a lot of small parts involved when you replace a washer.
They can easily slip out of your hand.If you don't have a plug for your faucet, simply place a wet rag over the drain. , You want to make sure the o-rings fit the washer exactly.
Otherwise, your water will not run properly.
If you are uncertain what type of o-rings you need, take the old o-rings to a department store.
You should be able to find a match there., There are many problems that could cause a leaky faucet.
Worn-out seals, loose parts, or broken plumbing can cause a leak.
These problems will be difficult to correct on your own, so you should contact a professional.
About the Author
Aaron Ward
Creates helpful guides on creative arts to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: