How to Clean a Popcorn Machine
Cool the unit., Wash the cover and melter., Rinse the chute with a damp cloth., Replace all components and store.
Step-by-Step Guide
-
Step 1: Cool the unit.
Before cleaning, allow the unit to cool entirely with all components in place.
The unit should be allowed to cool on its own.
Do not introduce water or other agents to help cool the machine.Unplug the machine while allowing it to cool.
While many machines can cool in as little as an hour, it may be advisable to let the machine sit for a few hours or overnight to allow it to cool completely. -
Step 2: Wash the cover and melter.
Wash the cover, the butter melter cup, and any other removable components with dish soap or a mild detergent and warm water.
Unless the manufacturer’s manual specifically states the components are dishwasher safe, wash all components by hand.Do not wash any electrical or non-removable components with water, as this could cause damage to the maker.
Use a sponge or washcloth to wash the removable components.
Do not use steel wool or other scouring instruments.
Allow the components to dry completely on a drying rack or on the counter before replacing them. , If the chute is not removable, use a damp cloth to wipe it down.
Avoid rinsing inside the popping chamber, as this could cause problems with the electrical equipment.Clean out debris from the popping chamber by using a dry cleaning cloth such as a microfiber cloth or fleece cleaner. , Once all components are clean and dry, place them back in their appropriate spots on the popcorn maker.
Store the maker in a dry place such as a cabinet or shelf in the kitchen.
Make sure that the cord is wrapped properly and not hanging down when the maker is stored to help prevent damage to the plug. -
Step 3: Rinse the chute with a damp cloth.
-
Step 4: Replace all components and store.
Detailed Guide
Before cleaning, allow the unit to cool entirely with all components in place.
The unit should be allowed to cool on its own.
Do not introduce water or other agents to help cool the machine.Unplug the machine while allowing it to cool.
While many machines can cool in as little as an hour, it may be advisable to let the machine sit for a few hours or overnight to allow it to cool completely.
Wash the cover, the butter melter cup, and any other removable components with dish soap or a mild detergent and warm water.
Unless the manufacturer’s manual specifically states the components are dishwasher safe, wash all components by hand.Do not wash any electrical or non-removable components with water, as this could cause damage to the maker.
Use a sponge or washcloth to wash the removable components.
Do not use steel wool or other scouring instruments.
Allow the components to dry completely on a drying rack or on the counter before replacing them. , If the chute is not removable, use a damp cloth to wipe it down.
Avoid rinsing inside the popping chamber, as this could cause problems with the electrical equipment.Clean out debris from the popping chamber by using a dry cleaning cloth such as a microfiber cloth or fleece cleaner. , Once all components are clean and dry, place them back in their appropriate spots on the popcorn maker.
Store the maker in a dry place such as a cabinet or shelf in the kitchen.
Make sure that the cord is wrapped properly and not hanging down when the maker is stored to help prevent damage to the plug.
About the Author
Theresa Sullivan
A passionate writer with expertise in DIY projects topics. Loves sharing practical knowledge.
Rate This Guide
How helpful was this guide? Click to rate: