How to Clean a Wood Fence
Cover the ground around the fence with plastic., Remove heavy debris with a wire brush., Spray the fence down with a garden hose., Use a lower powered washer., Snap on a 25-degree tip., Stand two feet away from your fence., Spray the water in long...
Step-by-Step Guide
-
Step 1: Cover the ground around the fence with plastic.
If you have plants you care about or you decide to use a chemical cleaner, you’ll want to cover the area around the fence with plastic.
Go to your local hardware store and purchase enough plastic sheeting to cover the plants and grass up to at least 3 feet (0.91 m) from your wood fence.Purchase just enough plastic for one section and move it with you when you move to the next to save money. -
Step 2: Remove heavy debris with a wire brush.
A stainless steel wire brush prepares a wood fence for painting, but it is also handy at getting rid of stuck on dirt and grime.
Run a wire brush over any caked-on or large pieces of debris.
Be careful not to scrub a wire brush into a painted fence too deeply.If you don’t already have one, purchase a wire brush at a hardware or home improvement store.
Substitute a plastic bristle scrub brush for a wire brush and use a little more pressure. , Make sure you have a garden hose handy, whether or not you’re using the assistance of a power washer.
Wet your wood fence down and remove surface dirt by spraying all over with a garden hose on medium to high pressure., There’s no need to spray your wood fence with the most powerful washer because the pressure can warp and indent the wood.
Look for a pressure washer with a strength between 1500 to 2000 psi and steer clear of models with an engine over this., A 25-degree tip on a pressure washer will fan out the water for a gentler wash.
Attach a green 25-degree tip onto the end of the pressure washer sprayer.
Whether you rent or own a pressure washer, you should have a variety of color coded tips and a 25-degree is typically green., Regardless of the tip you attach or the strength of your pressure washer, it’s a powerful tool.
Make sure you stand at least 2 feet (0.61 m) away from your wood fence to prevent any damage., Standing 2 feet (0.61 m) away, use long, even strokes to spray off debris and bring your wood fence back to life.
Slowly move the spray tip 1 foot (0.30 m) closer to the surface and spray the length of the fence using even strokes until the wood looks brighter., Don’t damage your wood fence by spraying too long in one spot.
Change the area you’re spraying frequently.
After you’ve brightened several fence posts using long, even strokes and you don’t see any more color change on the wood, move over to the next set of fence posts., If your fence is not coming as clean as you'd like it, change the pressure with an 18-degree tip.
Snap off the 25-degree tip and snap on an 18-degree tip.
The added pressure should be enough to clean your fence spotless without damaging it., Mix together an oxygen bleach powder, like Oxiclean, according to the manufacturer's directions.
Apply the mixture to a water dampened fence with a large painter’s brush, leave it for 15 minutes and then scrub the surface with a plastic, bristle scrub brush.
Rinse the mixture and any remaining residue with a garden hose., Get rid of green residue from algae or mold by mixing two parts water to one part chlorine bleach.
Add a teaspoon of dish soap for extra cleaning power and scrub grime away with a bristle brush.
Concentrate and use a little elbow grease on stained areas.
Rinse your wood fence off thoroughly after you scrub all areas down., You can also buy a pre-mixed cleaning solution to clean your wood fence by hand.
Go to your local hardware or home improvement store and look for a cleaner specifically for wood.
They will often be geared towards wood fences and decks.
Follow specific instructions given by the product's manufacturer., Mix 1⁄2 cup (120 mL) white vinegar to one gallon of warm water to remove unsightly mildew or moss.
Apply the mixture with a sponge, let it sit for 15 minutes and scrub your fence with a bristle brush.
Rinse with water from a garden hose thoroughly afterward. -
Step 3: Spray the fence down with a garden hose.
-
Step 4: Use a lower powered washer.
-
Step 5: Snap on a 25-degree tip.
-
Step 6: Stand two feet away from your fence.
-
Step 7: Spray the water in long
-
Step 8: even strokes.
-
Step 9: Vary the areas you concentrate on.
-
Step 10: Use an 18-degree tip for added cleaning.
-
Step 11: Use oxygenated bleach on a wood fence.
-
Step 12: Remove mold and algae with chlorine bleach.
-
Step 13: Use a commercial wood cleaner.
-
Step 14: Use white vinegar to remove mildew.
Detailed Guide
If you have plants you care about or you decide to use a chemical cleaner, you’ll want to cover the area around the fence with plastic.
Go to your local hardware store and purchase enough plastic sheeting to cover the plants and grass up to at least 3 feet (0.91 m) from your wood fence.Purchase just enough plastic for one section and move it with you when you move to the next to save money.
A stainless steel wire brush prepares a wood fence for painting, but it is also handy at getting rid of stuck on dirt and grime.
Run a wire brush over any caked-on or large pieces of debris.
Be careful not to scrub a wire brush into a painted fence too deeply.If you don’t already have one, purchase a wire brush at a hardware or home improvement store.
Substitute a plastic bristle scrub brush for a wire brush and use a little more pressure. , Make sure you have a garden hose handy, whether or not you’re using the assistance of a power washer.
Wet your wood fence down and remove surface dirt by spraying all over with a garden hose on medium to high pressure., There’s no need to spray your wood fence with the most powerful washer because the pressure can warp and indent the wood.
Look for a pressure washer with a strength between 1500 to 2000 psi and steer clear of models with an engine over this., A 25-degree tip on a pressure washer will fan out the water for a gentler wash.
Attach a green 25-degree tip onto the end of the pressure washer sprayer.
Whether you rent or own a pressure washer, you should have a variety of color coded tips and a 25-degree is typically green., Regardless of the tip you attach or the strength of your pressure washer, it’s a powerful tool.
Make sure you stand at least 2 feet (0.61 m) away from your wood fence to prevent any damage., Standing 2 feet (0.61 m) away, use long, even strokes to spray off debris and bring your wood fence back to life.
Slowly move the spray tip 1 foot (0.30 m) closer to the surface and spray the length of the fence using even strokes until the wood looks brighter., Don’t damage your wood fence by spraying too long in one spot.
Change the area you’re spraying frequently.
After you’ve brightened several fence posts using long, even strokes and you don’t see any more color change on the wood, move over to the next set of fence posts., If your fence is not coming as clean as you'd like it, change the pressure with an 18-degree tip.
Snap off the 25-degree tip and snap on an 18-degree tip.
The added pressure should be enough to clean your fence spotless without damaging it., Mix together an oxygen bleach powder, like Oxiclean, according to the manufacturer's directions.
Apply the mixture to a water dampened fence with a large painter’s brush, leave it for 15 minutes and then scrub the surface with a plastic, bristle scrub brush.
Rinse the mixture and any remaining residue with a garden hose., Get rid of green residue from algae or mold by mixing two parts water to one part chlorine bleach.
Add a teaspoon of dish soap for extra cleaning power and scrub grime away with a bristle brush.
Concentrate and use a little elbow grease on stained areas.
Rinse your wood fence off thoroughly after you scrub all areas down., You can also buy a pre-mixed cleaning solution to clean your wood fence by hand.
Go to your local hardware or home improvement store and look for a cleaner specifically for wood.
They will often be geared towards wood fences and decks.
Follow specific instructions given by the product's manufacturer., Mix 1⁄2 cup (120 mL) white vinegar to one gallon of warm water to remove unsightly mildew or moss.
Apply the mixture with a sponge, let it sit for 15 minutes and scrub your fence with a bristle brush.
Rinse with water from a garden hose thoroughly afterward.
About the Author
Denise Chapman
Dedicated to helping readers learn new skills in crafts and beyond.
Rate This Guide
How helpful was this guide? Click to rate: