How to Clean Baby Strollers

Disassemble the fabric., Brush away any debris., Vacuum up all loose dirt., Machine wash the seat and canopy if they are detachable., Use soap and water to hand wash the seat and canopy if they are not detachable., Rub the foam handlebar with soap...

20 Steps 5 min read Advanced

Step-by-Step Guide

  1. Step 1: Disassemble the fabric.

    If the canopy or padded portions are easy-on, easy-off, detach them by hand.Use a screwdriver to remove bolts that hold the fabric down.

    Put the pieces aside to clean later., Use your hand to wipe away any crumbs or twigs that have collected on the seat.

    Look for larger pieces of food or dried leaves.

    For smaller crumbs that you can’t brush away by hand, use a vacuum., Use a handheld vacuum or the flexible nozzle attachment from your standard household vacuum.

    Suck up all remaining crumbs or loose dirt from the fabric surfaces.

    Run the vacuum multiple times over all the pockets and storage areas.Pay extra attention to the spot where the back of the stroller meets the seat because that tends to be the dirtiest spot with the most crumbs., Always use the gentle cycle and avoid machine drying anything., Soak a soft towel with lukewarm water and soap and run the towel over all the fabric surfaces.

    Only use gentle, baby-safe soaps., Just as you did with the larger fabric pieces, use a towel on the foam handlebar.

    Use lukewarm water and the same baby-safe soaps., Bring the stroller to a spot outside where it is okay to make a mess.

    Use a hose to wet the entire stroller and rinse off soap residue.

    If you don’t have access to a hose, use a bucket to dump the water over everything., If stains or soiled spots still remain after the overall cleaning, apply a soft fabric brush or toothbrush to the area.

    Wet the spot thoroughly.

    Use a stain removing spray to target the spot directly.

    Strollers are made to withstand the elements so don’t be afraid to scrub as needed., Check all foam and fabric on the stroller, thoroughly, for mold.

    Bring it outside to clean it so you don’t inhale the spores.

    Scrub the moldy area with soap and water.

    Rinse it well and let it dry for several hours.

    To remove any mold that still remains after the first wash, wet the area with lemon juice, sprinkle it with salt, and let it dry in the sun.

    To remove larger mold stains, mix three parts white vinegar and two parts water in a spray bottle.

    Spray over the area until it is fully saturated.

    To remove mold from light or white fabrics, use 2 tablespoons of chlorine bleach and 1 quart of water., Use a dry towel to wipe away excess water and soap.

    Hang any loose pieces of fabric up to dry.

    On a nice day, leave everything under the warm sun for a few hours. , Remove the bassinet or seat, first.

    Next, take off any remaining accessories.

    Cup holders and food trays are easily detachable and can be cleaned more thoroughly once they are separated from the larger frame., Check all the components to make sure they are in good working order.

    Confirm that all the moving parts or car seat adapters are fully functioning.

    Check for sticky spots or stuck levers that might need extra attention., Check the nooks and crannies.Clean snack trays the same way you would clean any surface that you eat on.

    Scrub vigorously with nontoxic cleaners., Using a baby-safe all purpose cleaner, wipe down the frame of the stroller with a soft towel.

    Make sure to use warm water.

    Wipe down detached metal or plastic parts as well., Make sure the brake locks both wheels in place.

    Wipe away any dirt or debris that might be stuck in the brake.

    For squeaky or sticky brakes, spray WD-40 to keep the stroller running smoothly., Find your wheel release mechanism and remove the stroller wheels.

    Clean the rims with a gentle disinfectant.

    Use a small brush to remove sand and dirt from the tires.If your stroller has pneumatic tires, check the air pressure in the wheels to make sure they are inflated correctly.

    For tires without air, check the tread and make sure there aren’t any holes or other issues that would stop the wheels from working. , Once everything is clean and dry, reattach the fabric pieces to the frame.

    Use screws or tools if needed, otherwise just snap the parts into place.

    Reattach the cup holders, trays, and all other accessories., Give the fabric and frame a once over with disinfectant spray.

    Next, deodorize everything with a pleasant smelling spray to keep it fresh and new. , To prevent rust or mold, wait until the stroller is dry before you fold it.

    Remove car seat adapters before folding it.

    Store the stroller at room temperature to preserve any plastic pieces that are at risk of morphing or melting.

    Avoid stacking other items on top of it., If your stroller is near a window, cover it to protect from dust build-up or sunlight that will fade the colors on the fabric.

    Avoid putting it on a dirty garage or basement floor.

    Consider utility hooks to lift the stroller up and away from debris.
  2. Step 2: Brush away any debris.

  3. Step 3: Vacuum up all loose dirt.

  4. Step 4: Machine wash the seat and canopy if they are detachable.

  5. Step 5: Use soap and water to hand wash the seat and canopy if they are not detachable.

  6. Step 6: Rub the foam handlebar with soap and water.

  7. Step 7: Hose down the seat and canopy.

  8. Step 8: Treat spots with a smaller brush.

  9. Step 9: Scrub away any mold.

  10. Step 10: Air dry everything in the sun.

  11. Step 11: Disassemble the frame.

  12. Step 12: Inspect the parts.

  13. Step 13: Brush away any crumbs or debris.

  14. Step 14: Wipe down the surfaces with a gentle all-purpose cleaner.

  15. Step 15: Check the brake.

  16. Step 16: Wash the wheels with disinfectant.

  17. Step 17: Reassemble the pieces.

  18. Step 18: Spray the stroller with a disinfectant.

  19. Step 19: Protect the frame.

  20. Step 20: Pick a safe spot.

Detailed Guide

If the canopy or padded portions are easy-on, easy-off, detach them by hand.Use a screwdriver to remove bolts that hold the fabric down.

Put the pieces aside to clean later., Use your hand to wipe away any crumbs or twigs that have collected on the seat.

Look for larger pieces of food or dried leaves.

For smaller crumbs that you can’t brush away by hand, use a vacuum., Use a handheld vacuum or the flexible nozzle attachment from your standard household vacuum.

Suck up all remaining crumbs or loose dirt from the fabric surfaces.

Run the vacuum multiple times over all the pockets and storage areas.Pay extra attention to the spot where the back of the stroller meets the seat because that tends to be the dirtiest spot with the most crumbs., Always use the gentle cycle and avoid machine drying anything., Soak a soft towel with lukewarm water and soap and run the towel over all the fabric surfaces.

Only use gentle, baby-safe soaps., Just as you did with the larger fabric pieces, use a towel on the foam handlebar.

Use lukewarm water and the same baby-safe soaps., Bring the stroller to a spot outside where it is okay to make a mess.

Use a hose to wet the entire stroller and rinse off soap residue.

If you don’t have access to a hose, use a bucket to dump the water over everything., If stains or soiled spots still remain after the overall cleaning, apply a soft fabric brush or toothbrush to the area.

Wet the spot thoroughly.

Use a stain removing spray to target the spot directly.

Strollers are made to withstand the elements so don’t be afraid to scrub as needed., Check all foam and fabric on the stroller, thoroughly, for mold.

Bring it outside to clean it so you don’t inhale the spores.

Scrub the moldy area with soap and water.

Rinse it well and let it dry for several hours.

To remove any mold that still remains after the first wash, wet the area with lemon juice, sprinkle it with salt, and let it dry in the sun.

To remove larger mold stains, mix three parts white vinegar and two parts water in a spray bottle.

Spray over the area until it is fully saturated.

To remove mold from light or white fabrics, use 2 tablespoons of chlorine bleach and 1 quart of water., Use a dry towel to wipe away excess water and soap.

Hang any loose pieces of fabric up to dry.

On a nice day, leave everything under the warm sun for a few hours. , Remove the bassinet or seat, first.

Next, take off any remaining accessories.

Cup holders and food trays are easily detachable and can be cleaned more thoroughly once they are separated from the larger frame., Check all the components to make sure they are in good working order.

Confirm that all the moving parts or car seat adapters are fully functioning.

Check for sticky spots or stuck levers that might need extra attention., Check the nooks and crannies.Clean snack trays the same way you would clean any surface that you eat on.

Scrub vigorously with nontoxic cleaners., Using a baby-safe all purpose cleaner, wipe down the frame of the stroller with a soft towel.

Make sure to use warm water.

Wipe down detached metal or plastic parts as well., Make sure the brake locks both wheels in place.

Wipe away any dirt or debris that might be stuck in the brake.

For squeaky or sticky brakes, spray WD-40 to keep the stroller running smoothly., Find your wheel release mechanism and remove the stroller wheels.

Clean the rims with a gentle disinfectant.

Use a small brush to remove sand and dirt from the tires.If your stroller has pneumatic tires, check the air pressure in the wheels to make sure they are inflated correctly.

For tires without air, check the tread and make sure there aren’t any holes or other issues that would stop the wheels from working. , Once everything is clean and dry, reattach the fabric pieces to the frame.

Use screws or tools if needed, otherwise just snap the parts into place.

Reattach the cup holders, trays, and all other accessories., Give the fabric and frame a once over with disinfectant spray.

Next, deodorize everything with a pleasant smelling spray to keep it fresh and new. , To prevent rust or mold, wait until the stroller is dry before you fold it.

Remove car seat adapters before folding it.

Store the stroller at room temperature to preserve any plastic pieces that are at risk of morphing or melting.

Avoid stacking other items on top of it., If your stroller is near a window, cover it to protect from dust build-up or sunlight that will fade the colors on the fabric.

Avoid putting it on a dirty garage or basement floor.

Consider utility hooks to lift the stroller up and away from debris.

About the Author

D

Doris Turner

Professional writer focused on creating easy-to-follow lifestyle tutorials.

100 articles
View all articles

Rate This Guide

--
Loading...
5
0
4
0
3
0
2
0
1
0

How helpful was this guide? Click to rate: