How to Clean Clay Pots

Step-by-Step Guide

1. 1

   Step 1: Empty your pots of all dirt and plants.

   Before you can clean the pot, it obviously needs to be empty.
   
   Dump out old plants and dirt.
   
   If you want to keep the plants in the pots, remove them gently and set them in an empty pot until the original pot is clean and dry., Once the pots are empty, brush away as much of the dirt as possible with your hands.
   
   Most of it should come away easily, but some of it may not., For stubborn dirt, use a stiff bristled brush.
   
   Brush gently back and forth across the surface of the pot.Don't use metal bristles on your clay pots
   - they can scratch the pot and leave white marks in the clay. , Mix together a 1:3 ratio of white vinegar to water in a large tub or sink.
   
   For example, you’ll want to use 1 cup (8 ounces) of vinegar with 3 cups (24 ounces) of water.
   
   If you’re cleaning a lot of pots, simply double or triple these amounts.You can also use a bleach and water mixture.
   
   Mix together ¼ cup (2 ounces) of bleach and five gallons of water., Place your pots in the water and vinegar solution and let them soak for twenty to thirty minutes.
   
   The liquid should completely cover your tallest pot.You might see or hear bubbles in the solution.
   
   That’s okay – it just means that the pots are coming clean. , After 20 to 30 minutes, take the pots out of the liquid to check them.
   
   If they’re ready to come out, you should be able to easily remove any remaining residue with your hands or a brush.If you can’t easily remove the remaining residue, let the pots soak for 5 to 10 minutes longer. , The rims of clay pots tend to become very dirty.
   
   If you have extra dirty rims, flip them upside down and place them on plates or in a bowl with a layer of pure vinegar in them.
   
   Let them sit for about 10 minutes., The amount of baking soda paste you need will vary depending on how many pots you’re cleaning and how extensive the salt stains are.
   
   But you should add just enough water to baking soda to give it the consistency of hand lotion., You should spread enough paste to cover the salt stains completely.
   
   It should be just thick enough to cover the stain., The paste will dry slightly as it sits – that’s okay., After five to ten minutes, use your hands or a brush to scrub away the now-dry paste.
   
   You might need to rinse the pots to completely remove the paste, but once you do, the salt stain should be gone., Set your dishwasher to its quickest wash setting, and add the amount of soap you would add for a small to medium load of dishes., Let your pots run through a full cycle in your dishwasher.
   
   The heat and the soap will disinfect your pots., Once your pots are done in the dishwasher, leave them in the rack to dry completely.
   
   This can take up to a couple of hours.
   
   You can also speed the drying process by placing them outside on a sunny day.
2. 2

   Step 2: Brush away dirt.

3. 3

   Step 3: Scrub the pot with a brush.

4. 4

   Step 4: Mix a water and vinegar solution.

5. 5

   Step 5: Let the pots soak for 20 to 30 minutes.

6. 6

   Step 6: Check the pots.

7. 7

   Step 7: Soak really dirty rims in pure vinegar.

8. 8

   Step 8: Make a baking soda paste.

9. 9

   Step 9: Spread over the salt build up.

10. 10

    Step 10: Let the paste sit for five to ten minutes.

11. 11

    Step 11: Scrub away the paste.

12. 12

    Step 12: Set the dishwasher to quick-wash. Once you’ve soaked your pots

13. 13

    Step 13: you’ll want to disinfect them.

14. 14

    Step 14: Run your pot through.

15. 15

    Step 15: Let them dry.

Detailed Guide

About the Author