How to Clean Nickel
Wipe the nickel down daily., Use dish soap for routine cleanings., Remove hard water stains with a vinegar solution., Dry the surface with a microfiber cloth., Polish the nickel.
Step-by-Step Guide
-
Step 1: Wipe the nickel down daily.
Use a microfiber cloth.
Microfiber is soft enough to keep the surface from getting scratched.
It's also very good at preventing dirty and grimy buildup.
A few simple strokes will remove dust and water stains., Opt for a mild detergent to keep the shiny surface intact.
Apply the detergent to a damp cloth.
Wipe the surface to remove stains made from water, toothpaste, soap scum, etc., If you see calcium deposits (also known as limescale) on your faucets, you have hard water.
To tackle this problem, mix equal parts water and white vinegar.
Dip a cloth in the solution.
Lay the cloth on the stains or deposits and let it sit there for five minutes.
Wipe the area when the five minutes are up., Move in a gentle circular direction to shine the surface.
Continue until the nickel is completely dry.
Do this after you have finished cleaning.
If you have hard water, dry the surface any time it gets wet., Apply a small amount of nickel polish to a clean cloth.
Aim for a dollop, about the diameter of a nickel or ten-pence coin.
Buff the surface in gentle circular strokes.
This will give the nickel an added shine and reduce the risk of staining in the near future.
Do this about once per week. -
Step 2: Use dish soap for routine cleanings.
-
Step 3: Remove hard water stains with a vinegar solution.
-
Step 4: Dry the surface with a microfiber cloth.
-
Step 5: Polish the nickel.
Detailed Guide
Use a microfiber cloth.
Microfiber is soft enough to keep the surface from getting scratched.
It's also very good at preventing dirty and grimy buildup.
A few simple strokes will remove dust and water stains., Opt for a mild detergent to keep the shiny surface intact.
Apply the detergent to a damp cloth.
Wipe the surface to remove stains made from water, toothpaste, soap scum, etc., If you see calcium deposits (also known as limescale) on your faucets, you have hard water.
To tackle this problem, mix equal parts water and white vinegar.
Dip a cloth in the solution.
Lay the cloth on the stains or deposits and let it sit there for five minutes.
Wipe the area when the five minutes are up., Move in a gentle circular direction to shine the surface.
Continue until the nickel is completely dry.
Do this after you have finished cleaning.
If you have hard water, dry the surface any time it gets wet., Apply a small amount of nickel polish to a clean cloth.
Aim for a dollop, about the diameter of a nickel or ten-pence coin.
Buff the surface in gentle circular strokes.
This will give the nickel an added shine and reduce the risk of staining in the near future.
Do this about once per week.
About the Author
Theresa Hughes
Writer and educator with a focus on practical lifestyle knowledge.
Rate This Guide
How helpful was this guide? Click to rate: