How to Clean Porcelain Tiles

Step-by-Step Guide

1. 1

   Step 1: Sweep the floor with a dust mop.

   Start by sweeping the floor to remove any dust on the porcelain tiles.
   
   You can use a dry dust mop or a vacuum.
   
   You can also use a microfiber mop, as it will be gentle on the tiles.
   
   Brooms with straw or plastic bristles will be too harsh on the floor and could scratch the tiles.Make sure you sweep in the corners and between tiles.
   
   You want to try to remove as much surface dust on the tiles as you can before you move on to more intense cleaning.
2. 2

   Step 2: Use a soft

   You can use a nylon cleaning brush or an old toothbrush to remove any dirt or dark spots on the floor.
   
   Wet the floor with hot water and use the brush to remove surface dirt.
   
   Scrub the tile in a circular motion, making sure the tile is damp when you scrub it.
   
   Do not scrub any tiles that are dry, as this could scratch the tile. , If you notice any stains on your polished or glazed porcelain tiles, you should apply a cleaning solution using a mop.
   
   You can use a home solution of white vinegar and water or a professional cleaning solution.Make a home solution by combining ¼ cup white vinegar with two gallons of warm water.
   
   Mop the floor and let it sit for five to ten minutes.
   
   Then, mop the floor again, rinsing off the solution.
   
   The vinegar will help to disinfect, deodorize, and clean the tiles.
   
   For a professional option, use a cleaning solution from your local home hardware store or the cleaning supplies aisle.
   
   You should make sure the solution is safe for use on glazed or polished tile before you use it.
   
   You may want to do a spot test by using a small amount of the solution on the floor to ensure it does not damage the floor.
   
   If there are coffee stains on the tiles, you can use baking soda to remove them.
   
   Apply a sprinkle of baking soda on the stain and then dampen it with a clean cloth.
   
   Gently scrub the area until the stain is removed., Finish your cleaning by mopping the tiles with a floor cleaner.
   
   You should use a mild cleaning solution that is safe for use on glazed or polished porcelain tiles.Make sure you mop the floor one more time with hot water before the cleaner dries on the tiles.
   
   This will ensure the cleaner does not stain or damage the tiles. , Use a microfiber cloth or a clean towel to dry the floor completely.
   
   Make sure there are no water spots or puddles of water remaining on the tiles.You can also open a window or set up a fan to dry the floor.
   
   Place fans in the room and open any windows to ensure an adequate airflow throughout the room.
   
   Once the floor is dry, you can buff it to a shine with a piece of cheesecloth.
   
   Rub the cheesecloth over the tiles in circular motions to buff them.
3. 3

   Step 3: nylon brush to remove any dirt.

4. 4

   Step 4: Apply a cleaning solution for stains.

5. 5

   Step 5: Mop the floor.

6. 6

   Step 6: Dry and buff the floor.

Detailed Guide

About the Author