How to Make DIY Pallet Book Shelves

Step-by-Step Guide

1. 1

   Step 1: Find a used wooden pallet.

   Usually they are available at warehouses or recycling stores.
2. 2

   Step 2: Flip the pallet.

   You will use this side as your shelf. ,, Mark a line about 12 inches (30.5 cm) from the bottom.
   
   Or simply visualize the height of your shelf. , It's really up to you if you want to cut in middle. , You will use this as a base for the pallet shelves. ,,, Nail the plank into place. , Insert a screw on the tacks. ,
3. 3

   Step 3: Grab a sandpaper and smoothen the surface of the pallet.

4. 4

   Step 4: Grab a pencil and a ruler.

5. 5

   Step 5: Use an Electric saw to cut the pallet into pieces.

6. 6

   Step 6: Grab a piece of plywood.

7. 7

   Step 7: Measure the base of the feet of the pallets.

8. 8

   Step 8: Transfer the measurements to your plywood.

9. 9

   Step 9: Place the plank on top of the feet of the pallet.

10. 10

    Step 10: Drill two holes on your wall

11. 11

    Step 11: one on each side.

12. 12

    Step 12: Hang your shelves!

Detailed Guide

About the Author