How to Paint a Bathroom
Take down any wall hangings and decorations or accessories from the sink and tub., Remove the toilet., Put painter's tape on baseboard moldings and door and window trims to avoid dripping paint on these areas., Place drop cloths on the floor and...
Step-by-Step Guide
-
Step 1: Take down any wall hangings and decorations or accessories from the sink and tub.
Remove electrical outlet and wall switch covers, towel bars, window treatments, and cabinet handles or knobs. -
Step 2: Remove the toilet.
Complete toilet removal is not mandatory to paint a bathroom, but it is suggested to make painting the wall behind the toilet easier.
In some cases, toilet tanks might be too close to the wall for paint application. , Tape at least 2 inches (5 centimeters) in width is recommended.
Smooth down tape with a putty knife to ensure full adherence and to avoid any paint getting under the tape. , Make sure the edges of the drop cloths are up against the baseboard to avoid any paint dripping onto exposed areas of the floor. , Use a brush around the edges where the ceiling meets the walls.
Complete the job by using a roller on the end of an extension pole.
Allow for required drying time, then apply a second coat of paint to the ceiling. , If your bathroom is currently dark and you are looking to make it brighter with a light, softer color, you will need to prime the walls.
Follow manufacturer instructions for application details and dry time. , Start in one corner and work in one direction around the entire room. , As with cutting in, start in one corner and work in one direction around the room.
Paint using a vertical motion.
Avoid applying too much pressure to the roller. , Many paint manufacturers recommend applying 2 coats of paint for best results.
Be sure to wait the recommended drying time between coats. -
Step 3: Put painter's tape on baseboard moldings and door and window trims to avoid dripping paint on these areas.
-
Step 4: Place drop cloths on the floor and over the tub and counters.
-
Step 5: Paint the ceiling first
-
Step 6: if necessary.
-
Step 7: Apply primer to the walls
-
Step 8: if necessary.
-
Step 9: Cut in around windows
-
Step 10: corners
-
Step 11: outlet and wall switch openings and along the ceilings and baseboards with a brush.
-
Step 12: Use a roller to paint the larger sections of walls.
-
Step 13: Repeat
-
Step 14: if required
-
Step 15: with a second coat.
Detailed Guide
Remove electrical outlet and wall switch covers, towel bars, window treatments, and cabinet handles or knobs.
Complete toilet removal is not mandatory to paint a bathroom, but it is suggested to make painting the wall behind the toilet easier.
In some cases, toilet tanks might be too close to the wall for paint application. , Tape at least 2 inches (5 centimeters) in width is recommended.
Smooth down tape with a putty knife to ensure full adherence and to avoid any paint getting under the tape. , Make sure the edges of the drop cloths are up against the baseboard to avoid any paint dripping onto exposed areas of the floor. , Use a brush around the edges where the ceiling meets the walls.
Complete the job by using a roller on the end of an extension pole.
Allow for required drying time, then apply a second coat of paint to the ceiling. , If your bathroom is currently dark and you are looking to make it brighter with a light, softer color, you will need to prime the walls.
Follow manufacturer instructions for application details and dry time. , Start in one corner and work in one direction around the entire room. , As with cutting in, start in one corner and work in one direction around the room.
Paint using a vertical motion.
Avoid applying too much pressure to the roller. , Many paint manufacturers recommend applying 2 coats of paint for best results.
Be sure to wait the recommended drying time between coats.
About the Author
Christopher Morales
Committed to making crafts accessible and understandable for everyone.
Rate This Guide
How helpful was this guide? Click to rate: