How to Paint Big Fish in Watercolor
Practice doing fish first., Mount your 11 x 14" watercolor paper onto a double weight foam core board using masking tape on all edges to keep the piece from buckling as you work wet., Set up a palette with 1/4 inch of the primary and secondary...
Step-by-Step Guide
-
Step 1: Practice doing fish first.
Google "Fish Coloring Pages" and use those simple fish as reference.
Start with the curved backbone.
Draw two circles, one large and one small with the backbone dividing them.
Add flesh by smoothing over the circles.
Add tails, fins and eyes. -
Step 2: Mount your 11 x 14" watercolor paper onto a double weight foam core board using masking tape on all edges to keep the piece from buckling as you work wet.
Draw an odd number of simple fish on your watercolor paper.
Use the curved spine to capture them in motion.
Have at least two be close up. , Assemble brushes, water, and table salt in a shaker. ,, Use a big, soft brush. Touch one of colors randomly, to the background and quickly add another, floating on pigments until the background is a swirly, abstract array of color. , At that point, sprinkle on salt. Allow to air dry or use a hairdryer, cautiously at first not to disturb the paint. When it is dry, use the edge of a credit card to scrape off the salt., Remember to make them contrast with the background and to go lightly around the edges with darker paint to give the illusion they are rounded and have depth. Paint fins,scales, eyes and other details.
After the fish are dry scrub away some of the edges to create "lost" edge, integrating the fish with the background. -
Step 3: Set up a palette with 1/4 inch of the primary and secondary colors around the edges of a white
-
Step 4: plastic dinner plate.
-
Step 5: Prepare your paints by pulling with a wet brush blue
-
Step 6: green and yellow into the center of the plate and mixing with enough water to create three vibrant puddles of paint.
-
Step 7: Paint the background first by wetting your paper around the fish with clear water.
-
Step 8: Wait and watch until the surface of the paper goes from shiny to slightly dull.
-
Step 9: Paint the fish as you did the background
-
Step 10: by wetting the fish shapes and dropping in colors.
Detailed Guide
Google "Fish Coloring Pages" and use those simple fish as reference.
Start with the curved backbone.
Draw two circles, one large and one small with the backbone dividing them.
Add flesh by smoothing over the circles.
Add tails, fins and eyes.
Draw an odd number of simple fish on your watercolor paper.
Use the curved spine to capture them in motion.
Have at least two be close up. , Assemble brushes, water, and table salt in a shaker. ,, Use a big, soft brush. Touch one of colors randomly, to the background and quickly add another, floating on pigments until the background is a swirly, abstract array of color. , At that point, sprinkle on salt. Allow to air dry or use a hairdryer, cautiously at first not to disturb the paint. When it is dry, use the edge of a credit card to scrape off the salt., Remember to make them contrast with the background and to go lightly around the edges with darker paint to give the illusion they are rounded and have depth. Paint fins,scales, eyes and other details.
After the fish are dry scrub away some of the edges to create "lost" edge, integrating the fish with the background.
About the Author
Patrick Myers
Specializes in breaking down complex home improvement topics into simple steps.
Rate This Guide
How helpful was this guide? Click to rate: