How to Paint Black Wrought Iron
Scrub away any rust from the wrought iron., Sand the wrought iron., Apply a coat of rust inhibiting primer to the wrought iron., Sand the primer., Apply paint to the wrought iron.
Step-by-Step Guide
-
Step 1: Scrub away any rust from the wrought iron.
When left exposed to air (either indoors or outdoors), wrought iron will rust readily.
If there is any rust present on your piece, you should remove it instead of painting over it.
This is best done with a stiff wire brush, although it can be done more efficiently with a sandblaster if you have the required space to use one.
Scrub the entire piece with the brush until all visible rust is gone.
You may want to do this in a garage where you can easily sweep up the metal and paint flakes afterwards.
If the wrought iron is already painted, you will get the best results if you scrub away the old coat of paint with the wire brush. -
Step 2: Sand the wrought iron.
To prepare the iron for painting, go over the whole piece with medium-grit sandpaper.
This provides the ideal surface for the primer and paint to adhere to. , After sanding the piece smooth, you need to apply a coat of primer.
This will help prevent the formation of rust and make your paint color appear as it should.
Rust inhibiting primer is a product specifically designed for use on metals containing iron, and it can be purchased at any hardware store.
It is best applied with a brush in a single thin coat. , After letting the primer dry completely, sand it lightly with medium-grit sandpaper.
Clean the entire piece with a tack cloth before painting to ensure that metal flakes and dust do not mix into the paint. , For painting wrought iron, use exterior-grade enamel paint.
For best results, use a "direct-to-metal" (DTM) paint that contains a rust inhibiting ingredient.
Using ordinary exterior paint will lead to chipping.
The paint should be applied with a brush in long, smooth strokes.
A second coat can be applied if desired. -
Step 3: Apply a coat of rust inhibiting primer to the wrought iron.
-
Step 4: Sand the primer.
-
Step 5: Apply paint to the wrought iron.
Detailed Guide
When left exposed to air (either indoors or outdoors), wrought iron will rust readily.
If there is any rust present on your piece, you should remove it instead of painting over it.
This is best done with a stiff wire brush, although it can be done more efficiently with a sandblaster if you have the required space to use one.
Scrub the entire piece with the brush until all visible rust is gone.
You may want to do this in a garage where you can easily sweep up the metal and paint flakes afterwards.
If the wrought iron is already painted, you will get the best results if you scrub away the old coat of paint with the wire brush.
To prepare the iron for painting, go over the whole piece with medium-grit sandpaper.
This provides the ideal surface for the primer and paint to adhere to. , After sanding the piece smooth, you need to apply a coat of primer.
This will help prevent the formation of rust and make your paint color appear as it should.
Rust inhibiting primer is a product specifically designed for use on metals containing iron, and it can be purchased at any hardware store.
It is best applied with a brush in a single thin coat. , After letting the primer dry completely, sand it lightly with medium-grit sandpaper.
Clean the entire piece with a tack cloth before painting to ensure that metal flakes and dust do not mix into the paint. , For painting wrought iron, use exterior-grade enamel paint.
For best results, use a "direct-to-metal" (DTM) paint that contains a rust inhibiting ingredient.
Using ordinary exterior paint will lead to chipping.
The paint should be applied with a brush in long, smooth strokes.
A second coat can be applied if desired.
About the Author
Charlotte Peterson
A passionate writer with expertise in hobbies topics. Loves sharing practical knowledge.
Rate This Guide
How helpful was this guide? Click to rate: