How to Stencil with Acrylic Paint
Set up the canvas you want to print on., Choose a stencil., Squeeze a little bit of paint onto a palette or a foam plate., Use a stencil brush., Dab the brush over the canvas, inside the stencil., Continue until you've covered the stenciling area on...
Step-by-Step Guide
-
Step 1: Set up the canvas you want to print on.
If you want a colored background on the canvas, paint this first. , The stencil design will need to fit on the canvas.
If you're overlaying stencils, plan this out in advance.
If your stencil is made from a thinner material (like printer paper), be sure to cut the edges precisely.
Use thin slivers of tape under any edges that may fold over or stick up during the paint application, to avoid smearing or paint bleeding over the edges. , Always add less rather than more; top up as needed., Dip into the acrylic paint but here is the trick––only dip just the edge of the brush and do not apply too much paint.
Thin layers are the most effective for acrylic paint stenciling.
Rub off any excess paint if needed, using paper towel or an old rag.
A stencil brush has a wide, flat surface.
It's ideal for picking up a thin layer of paint.
A soft stencil brush with natural bristles is the best choice; do not use synthetic ones or any other sort of paintbrush.
Use a large stencil brush for large canvas areas, a small one for daintier and smaller areas. , Take a lot of care at the edges; do not push the brush under the stencil., Remove the brush., Apply other colors or areas only after the first one has dried, to avoid accidental smudging from your hand movements.
Fortunately, acrylics dry quickly., Carefully pull away.
The stenciled print will now be completed. -
Step 2: Choose a stencil.
-
Step 3: Squeeze a little bit of paint onto a palette or a foam plate.
-
Step 4: Use a stencil brush.
-
Step 5: Dab the brush over the canvas
-
Step 6: inside the stencil.
-
Step 7: Continue until you've covered the stenciling area on the canvas.
-
Step 8: Allow to dry completely.
-
Step 9: Remove the stencils when done.
Detailed Guide
If you want a colored background on the canvas, paint this first. , The stencil design will need to fit on the canvas.
If you're overlaying stencils, plan this out in advance.
If your stencil is made from a thinner material (like printer paper), be sure to cut the edges precisely.
Use thin slivers of tape under any edges that may fold over or stick up during the paint application, to avoid smearing or paint bleeding over the edges. , Always add less rather than more; top up as needed., Dip into the acrylic paint but here is the trick––only dip just the edge of the brush and do not apply too much paint.
Thin layers are the most effective for acrylic paint stenciling.
Rub off any excess paint if needed, using paper towel or an old rag.
A stencil brush has a wide, flat surface.
It's ideal for picking up a thin layer of paint.
A soft stencil brush with natural bristles is the best choice; do not use synthetic ones or any other sort of paintbrush.
Use a large stencil brush for large canvas areas, a small one for daintier and smaller areas. , Take a lot of care at the edges; do not push the brush under the stencil., Remove the brush., Apply other colors or areas only after the first one has dried, to avoid accidental smudging from your hand movements.
Fortunately, acrylics dry quickly., Carefully pull away.
The stenciled print will now be completed.
About the Author
Raymond Palmer
Enthusiastic about teaching crafts techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: