How to Make a Ribbon Bow from a Plastic Straw

Step-by-Step Guide

1. 1

   Step 1: Cut the straw into three parts

   Click on the image to enlarge, if needed. ,, Do this until it sits flat.,,, Cut a small ring from an intact piece of straw; this will be used to slip over the longer pieces and hold them together.,, Thread the loop over both pieces.
   
   Push it until it reaches the center.
   
   Bend the straw part that has the flexible or concertina piece. , Loop one side of the
   8.5cm (3.3") piece and tuck it into the loop or ring.
   
   Repeat with the remaining side.
   
   The ribbon or bow is made. , Make any adjustments needed., Trim fancy ends if wished.
2. 2

   Step 2: as shown in the picture.

3. 3

   Step 3: Cut open the 8.5 centimeter (3.3 in) (3.3") piece (as indicated in the earlier image).

4. 4

   Step 4: Fold the cut piece in half.

5. 5

   Step 5: Cut a diamond style shape in the center of this piece

6. 6

   Step 6: as shown in the picture.

7. 7

   Step 7: Cut open the part of the straw that has the flexible or concertina piece.

8. 8

   Step 8: Stroke down on the end with the back tip of a teaspoon.

9. 9

   Step 9: Fold this piece in half.

10. 10

    Step 10: Cut the center in a mountain shape

11. 11

    Step 11: as shown in the picture.

12. 12

    Step 12: Create the little ring or loop that sits around the longer parts of the bow.

13. 13

    Step 13: Place the layers together as shown in the picture.

14. 14

    Step 14: Add the loop or ring.

15. 15

    Step 15: Create the bow shape.

16. 16

    Step 16: Check that the bow is sitting evenly.

17. 17

    Step 17: Cut it any length you like.

Detailed Guide

About the Author