How to Blanch Beans
Use this method for any raw, fresh beans., Wash the beans under fresh running water to remove any debris and dirt., If preparing green beans or other long beans, cut off the thick stem end with a small knife., Boil a pot of water., Prepare a bowl of...
Step-by-Step Guide
-
Step 1: Use this method for any raw
The method is almost identical regardless of what beans you are blanching.
While one reason to blanch is to preserve the bright color of green beans or lima beans, any fresh bean benefits from blanching to preserve its flavor and nutrients.Dried beans require different cooking methods, since blanching will not fully cook them. -
Step 2: fresh beans.
The blanching should remove dirt as well, so you do not need to clean the beans thoroughly., It is not necessary to remove both ends of the bean.
If the beans are particularly long you may choose to cut them in half.
This will not affect the blanching process, but may make them easier to include in a salad or other dish. , Heat a pot of water to boiling, using approximately one gallon for each pound of beans (8 liters of water per kilogram of beans).
If you are only blanching a handful or two of beans, you do not need to measure precisely.
Optionally, add salt to the water for flavor.
Leave enough space in the pot to fit the beans.
If the amount of water required does not fit within approximately 2/3 of the pot, use a larger pot or blanch the beans in multiple batches. , Prepare the cold water bath while the water is boiling, since the beans will only take a few minutes to boil.
The water will work best if it is 60ºF (15.5ºC) or below, in order to rapidly cool the beans before they begin to lose nutrients and flavor.
Ice is recommended to keep this water cold.
If you are blanching a large quantity of beans, use approximately equal amounts of ice and beans by weight.If the cold tap water from your sink stings or numbs your hand, it is cold enough to use.
This water will warm to room temperature quickly, however, so if you are not using ice you may wish to fill the water bowl toward the end of the boiling process.
Replace the water frequently to keep it cold if you are blanching more than one pot of beans. , Add the beans to the water and start timing them once the water has returned to a boil.
Boil green beans and other long beans for 3 minutes.
Other types of bean, including lima, butter, and pinto beans, will require 2 to 4 minutes depending on size.The beans will taste cooked but still crisp when they are done blanching.If the water takes more than 60 seconds to return to a boil, you may be using too much water.
Reduce the amount of water next time to avoid losing flavor and nutrients.
If you have a blanching or steaming basket, you may place the beans inside it and lower it into the water.
This makes it possible to remove the beans without draining your water, which can then be used to blanch the next batch of beans or cook other foods. , Once the beans are ready, remove the beans from the boiling water and submerge them in the cold water bath until they are cold to the touch.
Removing the beans from the hot water can be accomplished by draining the beans through a strainer, or by lifting out the blanching basket if you used one.
This sudden chilling process is sometimes called "shocking".
Leave the beans in for approximately 3 minutes if you are not sure whether they are cool. , Once the beans are cold, drain away the ice water or remove them from the bath with a slotted spoon.
Your beans are now blanched and ready to use in a salad, casserole, or stir fry.
Because the blanching process has sealed in nutrients and color, the blanched beans will also preserve at a higher quality if frozen. , Once the beans are blanched and chilled, they are ready for freezing.
First, pat them dry to avoid ice crystals damaging the beans.You may use paper towels or a clean cloth. , You may use freezer bags with a resealable opening, or a vacuum sealer if you have one.
If you are using a hard container, leave about 1/2 inch (1.25cm) of space at the top of the container to prevent it from cracking if the beans expand or form ice crystals.
To remove most of the air from a resealable bag, place a drinking straw into the mostly sealed opening and suck out the air.
Remove the straw and seal the rest of the way. , If blanched correctly, the frozen beans should retain their flavor, color, and nutrients for 10–12 months.Using them within a few weeks will give you the best chance at high quality beans, however. , Remove the desired quantity of beans from the freezer and let thaw before using, or add directly to stir fries.
Try to avoid refreezing food once its been thawed, as this may cause the beans to deteriorate in quality.
Freezing the beans in small, separate containers may help prevent this. -
Step 3: Wash the beans under fresh running water to remove any debris and dirt.
-
Step 4: If preparing green beans or other long beans
-
Step 5: cut off the thick stem end with a small knife.
-
Step 6: Boil a pot of water.
-
Step 7: Prepare a bowl of chilled water.
-
Step 8: Boil the beans for about three minutes
-
Step 9: using a timer.
-
Step 10: Chill the beans.
-
Step 11: Drain the cooled beans.
-
Step 12: Dry the beans after chilling.
-
Step 13: Place the beans in freezer-safe containers.
-
Step 14: Use within 10 months for highest quality.
-
Step 15: Thaw before using.
Detailed Guide
The method is almost identical regardless of what beans you are blanching.
While one reason to blanch is to preserve the bright color of green beans or lima beans, any fresh bean benefits from blanching to preserve its flavor and nutrients.Dried beans require different cooking methods, since blanching will not fully cook them.
The blanching should remove dirt as well, so you do not need to clean the beans thoroughly., It is not necessary to remove both ends of the bean.
If the beans are particularly long you may choose to cut them in half.
This will not affect the blanching process, but may make them easier to include in a salad or other dish. , Heat a pot of water to boiling, using approximately one gallon for each pound of beans (8 liters of water per kilogram of beans).
If you are only blanching a handful or two of beans, you do not need to measure precisely.
Optionally, add salt to the water for flavor.
Leave enough space in the pot to fit the beans.
If the amount of water required does not fit within approximately 2/3 of the pot, use a larger pot or blanch the beans in multiple batches. , Prepare the cold water bath while the water is boiling, since the beans will only take a few minutes to boil.
The water will work best if it is 60ºF (15.5ºC) or below, in order to rapidly cool the beans before they begin to lose nutrients and flavor.
Ice is recommended to keep this water cold.
If you are blanching a large quantity of beans, use approximately equal amounts of ice and beans by weight.If the cold tap water from your sink stings or numbs your hand, it is cold enough to use.
This water will warm to room temperature quickly, however, so if you are not using ice you may wish to fill the water bowl toward the end of the boiling process.
Replace the water frequently to keep it cold if you are blanching more than one pot of beans. , Add the beans to the water and start timing them once the water has returned to a boil.
Boil green beans and other long beans for 3 minutes.
Other types of bean, including lima, butter, and pinto beans, will require 2 to 4 minutes depending on size.The beans will taste cooked but still crisp when they are done blanching.If the water takes more than 60 seconds to return to a boil, you may be using too much water.
Reduce the amount of water next time to avoid losing flavor and nutrients.
If you have a blanching or steaming basket, you may place the beans inside it and lower it into the water.
This makes it possible to remove the beans without draining your water, which can then be used to blanch the next batch of beans or cook other foods. , Once the beans are ready, remove the beans from the boiling water and submerge them in the cold water bath until they are cold to the touch.
Removing the beans from the hot water can be accomplished by draining the beans through a strainer, or by lifting out the blanching basket if you used one.
This sudden chilling process is sometimes called "shocking".
Leave the beans in for approximately 3 minutes if you are not sure whether they are cool. , Once the beans are cold, drain away the ice water or remove them from the bath with a slotted spoon.
Your beans are now blanched and ready to use in a salad, casserole, or stir fry.
Because the blanching process has sealed in nutrients and color, the blanched beans will also preserve at a higher quality if frozen. , Once the beans are blanched and chilled, they are ready for freezing.
First, pat them dry to avoid ice crystals damaging the beans.You may use paper towels or a clean cloth. , You may use freezer bags with a resealable opening, or a vacuum sealer if you have one.
If you are using a hard container, leave about 1/2 inch (1.25cm) of space at the top of the container to prevent it from cracking if the beans expand or form ice crystals.
To remove most of the air from a resealable bag, place a drinking straw into the mostly sealed opening and suck out the air.
Remove the straw and seal the rest of the way. , If blanched correctly, the frozen beans should retain their flavor, color, and nutrients for 10–12 months.Using them within a few weeks will give you the best chance at high quality beans, however. , Remove the desired quantity of beans from the freezer and let thaw before using, or add directly to stir fries.
Try to avoid refreezing food once its been thawed, as this may cause the beans to deteriorate in quality.
Freezing the beans in small, separate containers may help prevent this.
About the Author
Gloria Martinez
Creates helpful guides on home improvement to inspire and educate readers.
Rate This Guide
How helpful was this guide? Click to rate: