How to Change the Batteries in a Buzz Lightyear Action Figure

Step-by-Step Guide

1. 1

   Step 1: Locate the three screws that hold the battery pack cover in place.

   Look directly at the back of Buzz at center section of his wings assembly.
   
   There are two screws at the top spaced about 2 inches (5.1 cm) apart in the green painted sections and one at the bottom center below the lavender colored section.
2. 2

   Step 2: On newer models the green screws in his pack are fake

   Just pull the back of his jet pack cover straight off, it is mounted with rubber balls and sockets.
   
   Then use a small Philips screwdriver to remove the battery cover to find 2 AA batteries. ,,,,,,
3. 3

   Step 3: and there is no switch on the belt.

4. 4

   Step 4: Unscrew all three screws until back plate comes off

5. 5

   Step 5: Replace the two/three AA batteries.

6. 6

   Step 6: Replace battery cover and tighten the three screws.

7. 7

   Step 7: Make sure "On-Off" switch

8. 8

   Step 8: which is located on the back of Buzz's black waist

9. 9

   Step 9: is in the "On" position

10. 10

    Step 10: (Some do not have a switch)

11. 11

    Step 11: Press any button to test.

Detailed Guide

About the Author