How to Configure DHCP on Huawei MA5680T

Step-by-Step Guide

1. 1

   Step 1: Select DHCP forwarding mode.

   Huawei (config) #dhcp mode layer-3 standard
2. 2

   Step 2: Create DHCP server group.

   Huawei (config) #dhcp-server 1 IP
   10.1.1.1
   10.1.1.2 , Here the system default DHCP server work mode (load sharing mode), no configuration is necessary.
   
   Please refer to the specific configuration of DHCP server mode: "DHCP Server
   10.6 configuration mode". , Huawei (config) #vlan 2 smart Huawei (config) #port VLAN 2 0/19 0 Huawei (config) #interface giu 0/19 Huawei (config-if-giu-0/19) #native-vlan 0 VLAN 2 Huawei (config-if-giu-0/19) #quit Huawei (config) #service-port VLAN 2 GPON 0/2/0 gemport 128 multi-service user-vlan rx-cttr 5 tx-cttr 5 Huawei (config) #service-port VLAN 2 GPON 0/2/0 gemport 129 multi-service user-vlan rx-cttr 5 tx-cttr 5 , Huawei (config) #interface vlanif 2 Huawei (config-if-vlanif2) #ip address
   2.2.2.1 24 , Huawei (config-if-vlanif2) #dhcp-server 1 , Huawei (config-if-vlanif2) #quit Huawei (config) #save
3. 3

   Step 3: Select DHCP server mode.

4. 4

   Step 4: Configure the VLAN uplink port and service virtual port.

5. 5

   Step 5: Configure VLAN three layer interface IP address.

6. 6

   Step 6: Binding interface and DHCP server group.

7. 7

   Step 7: Save the data.

Detailed Guide

About the Author