How to Crack a Wep Protected Wi Fi With Airoway and Wifislax
Obtain and burn WiFiSlax., Check your computer’s hardware., Set your computer to boot from CD., Run WiFiSlax.
Step-by-Step Guide
-
Step 1: Obtain and burn WiFiSlax.
WiFiSlax is an operating system that you will be loading from a CD.
It contains the tools necessary to crack WEP encryption on wireless networks.
This only works with WEP encryption, not WPA/WPA2.
WiFiSlax is available for free from the developer’s website.
Burn the .iso file that you downloaded to a blank CD.
You can use any freeware image burning software to do this.
Open the burning software, and select Burn Image.
Browse for the .iso file that you downloaded. -
Step 2: Check your computer’s hardware.
In order to run this crack, you will need the IPW3945 chipset.
To find out if your computer possesses the chipset, open the command line by clicking Start and then entering CMD into the Search or Run box.
Once you have access to the command line, type "ipconfig /all".
Look for "Intel PRO/Wireless 3945ABG Network Connection".
This is a common chipset on many laptops.
In other operating systems like Linux-based ones, you can download programs like hardinfo to obtain a complete list of the hardware of your computer , In order to use WiFiSlax, you will need to make sure that your computer can boot from the CD drive.
TO do this, reboot the computer and open the BIOS menu.
You can access the BIOS menu when you see the computer manufacturer’s logo.
The key you need to press will be displayed on the screen.
It is typically F2, F10, F12 or Del.
In the BIOS screen, navigate to the Boot menu.
Set the first boot device as the CD/DVD drive.
This is sometimes labeled as an optical drive.
Setting it first will make the computer try to boot from the CD before it loads the operating system from the hard drive like it normally would. , After adjusting your BIOS settings and rebooting your computer, press a key when prompted to boot from the CD.
When presented with the first menu, select No PCMCIA and then press Enter.
Log in with the credentials:
User: root Password: toor Enter the command "startx" to start WiFiSlax with a graphic interface. -
Step 3: Set your computer to boot from CD.
-
Step 4: Run WiFiSlax.
Detailed Guide
WiFiSlax is an operating system that you will be loading from a CD.
It contains the tools necessary to crack WEP encryption on wireless networks.
This only works with WEP encryption, not WPA/WPA2.
WiFiSlax is available for free from the developer’s website.
Burn the .iso file that you downloaded to a blank CD.
You can use any freeware image burning software to do this.
Open the burning software, and select Burn Image.
Browse for the .iso file that you downloaded.
In order to run this crack, you will need the IPW3945 chipset.
To find out if your computer possesses the chipset, open the command line by clicking Start and then entering CMD into the Search or Run box.
Once you have access to the command line, type "ipconfig /all".
Look for "Intel PRO/Wireless 3945ABG Network Connection".
This is a common chipset on many laptops.
In other operating systems like Linux-based ones, you can download programs like hardinfo to obtain a complete list of the hardware of your computer , In order to use WiFiSlax, you will need to make sure that your computer can boot from the CD drive.
TO do this, reboot the computer and open the BIOS menu.
You can access the BIOS menu when you see the computer manufacturer’s logo.
The key you need to press will be displayed on the screen.
It is typically F2, F10, F12 or Del.
In the BIOS screen, navigate to the Boot menu.
Set the first boot device as the CD/DVD drive.
This is sometimes labeled as an optical drive.
Setting it first will make the computer try to boot from the CD before it loads the operating system from the hard drive like it normally would. , After adjusting your BIOS settings and rebooting your computer, press a key when prompted to boot from the CD.
When presented with the first menu, select No PCMCIA and then press Enter.
Log in with the credentials:
User: root Password: toor Enter the command "startx" to start WiFiSlax with a graphic interface.
About the Author
Richard Howard
Enthusiastic about teaching crafts techniques through clear, step-by-step guides.
Rate This Guide
How helpful was this guide? Click to rate: